The short answer on FCE8
FCE8 appears when the wrong appliance type or model number was selected at the beginning of registration, and the documentation calls it a Registration Error. Nothing is wrong with the oven: start the registration again, choose the correct appliance type, and enter the model number exactly as the rating label shows it. The cooking functions are unaffected while you sort it out.
Error codes
Reference| Code | Meaning |
|---|---|
| FCE8 | At the beginning of the registration process, the appliance type and model number needs to be selected. If the wrong appliance type or model number was selected, the "Registration Error" will appear. |
Behaviour that comes with FCE8
- FCE8 during registration — The type or model number chosen does not match the oven.
- The app listing a different appliance — The wrong appliance type was chosen.
- A model number that is close but not exact — A single character typed or chosen wrongly.
- The oven otherwise working normally — The error is in the registration, not the appliance.
Why FCE8 appears, in likelihood order
- The wrong model number — First: a single character wrong is enough.
- The wrong appliance type — Second: a different kind of appliance chosen at the start.
- A similar model picked from a list — Third: a neighbouring number selected instead of yours.
- An appliance fault — Not indicated: the documentation describes a registration mistake, not a failure.
Diagnosing FCE8: the order that saves time
- Find the rating label — It carries the exact model number.
- Photograph the label — Copy the number from the photo, character by character.
- Restart registration — Begin again from the first step in the app.
- Choose the correct type and model — Match both exactly to the label.
Clearing FCE8 and checking it safely
- Locate the rating label — Check the frame inside the oven door and behind the storage drawer.
Tools: flashlightAbout 3 min
- Photograph it — Take a clear photo so you can copy the model number exactly.
Tools: phoneAbout 1 min
- Start registration again — In the app, begin a new registration from the first step.
Tools: phoneAbout 5 min
- Enter the details carefully — Choose the correct appliance type, then enter or select the model number exactly as shown.
Tools: phoneAbout 5 min
Safety on this appliance
Safety
Unplug the range or switch off its breaker before removing any panel; a capacitor can hold a charge after the power is off. The rating label is visible without removing anything, so never take off a panel to look for it, and mind hot surfaces when reading a label near the oven opening. On a gas range, if you smell gas, do not switch anything on or off, leave the building, and call the gas utility or emergency services from outside. Use a flashlight rather than leaning into a warm oven to read a label at the edge of the opening.
Reset or repair: where the line is
A technician is not needed for FCE8 itself. Contact the app's support line if registration still fails with the correct type and an exactly matching model number, or if your model does not appear in the list at all. Keep the photo of the rating label with your records, since the same model and serial numbers are needed for any parts, warranty or service request later.
More Amana oven code pages
Model coverage and limits
This reading of FCE8 applies to Amana ovens with a wireless connection whose app reports a registration error with this code, as the table states. Registration steps vary by app version, and a model-specific page, where one exists, is the better guide. None is listed for FCE8 yet; start at the Amana oven code index below. Registration problems are handled by the app’s support line rather than by an appliance technician.
The Amana oven code list
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
