The short answer on F8 E2
F8 E2 means the cooling fan speed is too high, and there may be a problem with the oven cooling fan or its associated wiring. Nothing about airflow is listed for this code, so there is nothing to clear and certainly nothing to cover: reset once, listen to the fan, and have the fan and its wiring tested if F8 E2 returns.
Error codes
Reference| Code | Meaning |
|---|---|
| F8 E2 | Cooling fan speed too high. There may be a problem with the Oven Cooling Fan, or the associated wiring. |
Behaviour that comes with F8 E2
- A fan that sounds louder or higher-pitched than usual — The fan running faster than it should.
- A fan running hard even with the oven cool — The fan not following the control's speed setting.
- F8 E2 soon after the oven starts — The control spotting the speed fault early.
- A rattle along with the high speed — A damaged blade or loose fan part spinning freely.
Why F8 E2 appears, in likelihood order
- The oven cooling fan — First: the documentation names it, and a failing motor or speed-sensing part reports the wrong speed.
- The fan wiring — Second: a lead or connector feeding the fan, or carrying its speed signal, that has failed.
- A damaged fan blade — Third: a broken blade lets the motor spin too freely, a fault inside the fan assembly itself.
- A one-off fault — Last: a code that clears with a reset and does not return.
Diagnosing F8 E2: the order that saves time
- Listen to the fan — Note whether it sounds faster, louder or different from usual.
- Reset with the power off — Clears a code left by a passing fault.
- Leave the airflow alone — Slowing the fan by blocking vents risks overheating and fixes nothing.
- Have the fan and its wiring tested — A technician checks the motor, its speed signal and the leads.
Clearing F8 E2 and checking it safely
- Listen during a short bake — Run the oven briefly and note how the fan sounds compared with normal.
About 10 min
- Reset the oven — Switch off the breaker for a minute, then on.
Tools: breaker panel accessAbout 3 min
- Keep the vents clear — Leave every vent open, and never cover one to quieten the fan.
- Record the sound — Describe the noise, or record it on your phone, for the technician.
Tools: phoneAbout 2 min
Safety on this appliance
Safety
Switch off the breaker before removing any panel; a capacitor can hold a charge after the power is off. Never cover or block a vent to slow or quieten the fan: the controls need that airflow, and blocking it risks overheating. On a gas range, if you smell gas, do not switch anything on or off, leave the building, and call the gas utility or emergency services from outside.
Reset or repair: where the line is
Call if F8 E2 returns after a reset, if the fan sounds abnormal, or if it rattles. The technician tests the fan's motor and speed signal and the wiring between the fan and the control, and replaces the fan if it is at fault; it is usually a single-visit repair.
More Amana oven code pages
Model coverage and limits
This reading of F8 E2 applies to Amana ovens whose control reports high cooling fan speed with this code, as the table states. Fan type and speed control vary by model, and a model-specific page, where one exists, is the better guide. None is listed for F8 E2 yet; start at the Amana oven code index below.
The Amana oven code list
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
