What F5 E0 means
F5 E0 means there may be a problem with the oven door latch assembly, the door switch or their associated wiring. The door switch usually also controls the oven light, so the light is a free test: if it no longer follows the door opening and closing, the switch or its wiring is the likelier fault; if the light behaves, the latch moves up the list.
Error codes
Reference| Code | Meaning |
|---|---|
| F5 E0 | There may be a problem with the Oven Door Latch Assembly, the Door Switch, or the associated wiring. |
What the oven does alongside F5 E0
- The oven light staying on with the door shut — The switch is not being pressed, or has stuck, so the control may think the door is open.
- The oven light not coming on when the door opens — The switch or its wiring is not changing state as the door moves.
- Self-clean refusing to start, or the door not locking — The latch assembly is not reaching its locked position.
- Cooking pausing or refusing to start with F5 E0 — The control reading the door as open when it is shut.
What triggers F5 E0, most likely first
- The door switch — First when the oven light misbehaves: a worn or stuck switch no longer reports the door correctly.
- The door latch assembly — First when self-clean will not lock or unlock: its motor or position switches have failed.
- Wiring to the switch or latch — Third: leads above the oven cavity that age with heat, or a connector that has loosened.
- A door that is not closing fully — Last, and not on the documented list: a rack, pan or displaced gasket keeping the door off the switch.
Check order for F5 E0, and why
- Watch the oven light — Open and close the door slowly and see whether the light follows it.
- Check that the door closes fully — Look for anything stopping the door, or a gasket that is out of place.
- Reset at the breaker — Clears a latch or control left in an odd state.
- Have the switch and latch tested — A technician checks each part and its wiring with the power off.
Reset and owner-safe checks
- Test the light with the door — Open and close the door slowly, watching whether the oven light comes on and goes off as it should.
About 2 min
- Clear the door path — Remove anything that could stop the door shutting, and check the gasket is seated in its channel.
About 3 min
- Reset the oven — Switch off the breaker for a minute, then on, with the door closed.
Tools: breaker panel accessAbout 3 min
- Note the light and lock behaviour — Write down what the light does and whether the door locks, for the technician.
Tools: pen and paperAbout 2 min
Before any panel comes off
Safety
Unplug the range or switch off its breaker before removing any panel; a capacitor can hold a charge after the power is off. Never tape, wedge or hold the door switch to make the oven run, and never force a locked latch; both are there to protect you. On a gas range, if you smell gas, do not switch anything on or off, leave the building, and call the gas utility or emergency services from outside.
When F5 E0 needs a technician
Call if F5 E0 returns after a reset, if the oven light no longer follows the door, or if the door will not lock or unlock. The switch is a modest part; the latch is larger and sits above the cavity, and the technician tests both, with their wiring, before replacing either.
Other Amana oven codes
Which models this reading covers
This reading of F5 E0 applies to Amana ovens whose control reports the door latch assembly, door switch or their wiring with this code, as the table states. How the door switch and oven light are linked varies by model, and a model-specific page, where one exists, is the better guide. None is listed for F5 E0 yet; start at the Amana oven code index below.
Amana oven code index
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
