What F2 E3 means
F2 E3 means there may be a problem with the user interface or keypad, the control or the wiring between them. If the panel has been knocked, cracked or pressed hard, physical damage to the keys or the board behind them is the first suspect; switch off at the breaker if the panel is cracked through, and have it replaced.
Error codes
Reference| Code | Meaning |
|---|---|
| F2 E3 | There may be a problem with the User Interface or Keypad, the Control, or the associated wiring. |
What the oven does alongside F2 E3
- A visible crack or chip in the panel — Physical damage over the keys or display.
- Keys dead in one area only — Damage localised to part of the panel.
- The code after a pot or utensil struck the panel — The timing points to impact damage.
- A panel that flexes or rattles when pressed — A mounting broken behind the overlay.
What triggers F2 E3, most likely first
- Impact damage to the user interface — First when the code followed a knock or a crack is visible.
- A broken joint on the panel's board — Second: the board behind the keys can crack without visible damage outside.
- A connection jolted loose — Third: the ribbon or harness can be shaken out of its socket.
- The control — Last: impact on the panel rarely damages the main control.
Check order for F2 E3, and why
- Inspect the panel for cracks and flex — Visible damage settles the diagnosis quickly.
- Map which keys work — A dead area matching the damage confirms the panel.
- Reset at the breaker — Rules out a control lock-up after the knock.
- Have the panel and connection tested — A technician checks the panel board and its plug.
Reset and owner-safe checks
- Look closely at the panel — Check for cracks, chips or lifted edges with a flashlight.
Tools: flashlightAbout 3 min
- Map the dead keys — Press each key and note which work, to show the technician.
Tools: pen and paperAbout 3 min
- Reset the oven — Breaker off for a minute, then on.
Tools: breaker panel accessAbout 3 min
- Keep a cracked panel dry and unpowered — If the glass or overlay is cracked through, keep the breaker off and do not clean the panel with liquids until it is replaced.
Tools: breaker panel accessAbout 1 min
Before any panel comes off
Safety
A cracked panel can let moisture reach live parts behind it, so switch off the breaker and keep liquids away until it is replaced. Unplug the range or switch off its breaker before removing any panel; a capacitor can hold a charge after the power is off. On a gas range, if you smell gas, do not switch anything on or off, leave the building, and call the gas utility or emergency services from outside.
When F2 E3 needs a technician
Call if the panel is cracked, if keys are dead in one area, or if F2 E3 returns after a reset. Panels are replaced as an assembly, and the technician checks the connection and control so the new panel works first time. Keep the panel covered and dry until the visit if the damage is visible.
Other Amana oven codes
Which models this reading covers
This reading of F2 E3 applies to Amana ovens whose control reports the user interface, keypad, control or wiring with this code, as the table states. Other Amana controls report panel faults in other formats, and panel construction differs between models; a model-specific page, where one exists, is the better guide. None is listed for F2 E3 yet; begin at the Amana oven code index below.
Amana oven code index
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
