The short answer
On the ASI models this complaint is most often a blocked defrost drain rather than anything deeper. The models here step through more than one size, so the causes that scale with load — and the ones that depend on where a component had to go to fit a larger body — move up the order. The order below is settled by how this line is built, not by what is true of the brand as a whole.
What you observe
- A puddle on the floor in front of the cabinet — Which is a different fault from water inside, and it splits the list immediately.
- Ice growing low on the freezer back wall — Building upward from the trough rather than as a frost sheet across the whole panel.
- A wet patch at the back, behind the cabinet — Usually found only when the cabinet is pulled out for something else.
- NEAR MISS — water in the cabinet with a warm interior — Cooling is the fault to read about first; this water is a symptom of it.
Causes, most likely first on the ASI line
- A blocked defrost drain — Ranked first here — it is the cause that puts water inside the cabinet rather than on the floor, and inside is where most owners find it.
- Ice bridging the drain trough — Second here — the two are the same fault at different stages.
- A water line fitting weeping behind the cabinet — Third here — it is the cause that puts water on the floor with a dry interior, which splits the list in two.
- Body: This line is a size ladder rather than a set of finishes, so load and layout drive the ranking more than component age does. No cause changes place against a ranking that ignored the build, which is itself the finding: nothing about this line pulls one of them forward.
Check in this order, and why
- Look for water under the crisper drawers before looking anywhere else — Lift the drawers out.
- Look at the back wall of the freezer for a build-up of ice low down — Ice growing from the trough upward means the meltwater has nowhere to go and is refreezing where it sits.
- Pull the cabinet out and run a dry tissue round every fitting on the water line — A weep shows on paper long before it shows as a drip you can see.
- Body: These models differ in size, so the same component is not in the same place on every one of them. Each check answers the cause above it, in the same order, so a clean result moves you down the list rather than sideways.
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel — a capacitor can hold a charge after the power is off. Water and an electrical appliance are a bad pair: dry the floor before you pull the cabinet out, and never work on a wet floor with the unit plugged in. Shut the water supply off at its valve before touching any fitting, and do not clear a drain with a metal probe.
Models in the ASI family — Every model this page covers, exactly as the model line is recorded. Nothing outside this table is a model number, and nothing on this page claims to cover a model that is not in it.
Reference| Model number | Family key |
|---|---|
| ASI2175G**0* | amana:refrigerator:asi |
| ASI2275FR*0* | amana:refrigerator:asi |
| ASI2575FR*0* | amana:refrigerator:asi |
| ASI2575G**** | amana:refrigerator:asi |
| ASI2575G**0* | amana:refrigerator:asi |
When to call a technician
Call when the water is coming from a fitting you cannot reach dry, when the drain will not clear with warm water, or when the interior floods again within a day of being cleared. Call at once if water is reaching wiring or a socket — that stops being a leak and becomes an electrical fault.
Nearest pages of this class
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.