The short answer
A 4w3n40 ice maker that has stopped is far more often a supply problem than a mechanical one. Where the brand-generic article opens with the module, this one opens with the fill tube, because on this platform that is the part that freezes first.
What you actually observe
- Ice sitting in the mould that never drops — That is a different half of the list entirely.
- A buzz from the back every few hours with no water — That narrows it to supply, filter or valve.
- Ice is still made but far more slowly than before — A partial restriction, not a failure.
- Water in the bin or ice on the freezer floor — That needs attention sooner than a bin that is merely empty.
Causes on the 4w3n40 listings, most likely first
- A clogged or wrongly seated water filter — A cartridge past its life throttles the flow enough that the mould fills short, and a short fill makes hollow cubes before it makes none. A filter that is not fully home restricts the ice maker before it restricts the dispenser, because the mould gets the lower priority. The long revision run above covers a lot of production, and the oldest listings in it reach this point first.
- The bail arm or the ice level switch left off — Ranked high on this family because the bin sits where things get pushed against it. Check the arm is down before anything else.
- Cubes fused into a block in the bin — This is the fault that looks like plenty of ice and delivers none. It is worth ruling out before any part is suspected.
- A kinked or shut supply line — Ranked here because on a family with a small roster the supply arrangement varies more between kitchens than the appliance does.
Check in this order, and why
- Look into the mould, not into the bin — Dry mould and iced mould send you to opposite halves of this list, and nothing else distinguishes them. Do this before any other step.
- Check the bail arm or the level sensor is clear — It is free, it takes a second, and it is the single most common reason a working ice maker stops. Move whatever is leaning on the bin.
- Check the filter date and that it is fully seated — Cheap, quick, and it also tells you whether the dispenser has slowed, which is the same evidence from another angle. Purge a few litres after fitting.
- Confirm the freezer is actually cold enough — The harvest will not release until the ice is hard, so a warm compartment stalls a perfectly good ice maker. Leave a thermometer inside overnight so the reading is not chasing the last door opening.
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off. Never free a stuck mould or a jammed auger with a metal tool while the unit is powered: the harvest motor can start without warning and the mould heater is live. Shut the water off at the supply valve before you disturb any fitting.
Models in the 4w3n40 family — 29 listings spanning a long revision run; the suffix marks production date rather than a change of mechanism.
Reference| Model number | Family key |
|---|---|
| 4w3n40-10 | amana:refrigerator:4w3n40 |
| 4w3n40-11 | amana:refrigerator:4w3n40 |
| 4w3n40-12 | amana:refrigerator:4w3n40 |
| 4w3n40-13 | amana:refrigerator:4w3n40 |
| 4w3n40-14 | amana:refrigerator:4w3n40 |
| 4w3n40-15 | amana:refrigerator:4w3n40 |
| 4w3n40-16 | amana:refrigerator:4w3n40 |
| 4w3n40-17 | amana:refrigerator:4w3n40 |
| 4w3n40-18 | amana:refrigerator:4w3n40 |
| 4w3n40-19 | amana:refrigerator:4w3n40 |
| 4w3n40-20 | amana:refrigerator:4w3n40 |
| 4w3n40-21 | amana:refrigerator:4w3n40 |
| 4w3n40-22 | amana:refrigerator:4w3n40 |
| 4w3n40-23 | amana:refrigerator:4w3n40 |
| 4w3n40-24 | amana:refrigerator:4w3n40 |
| 4w3n40-25 | amana:refrigerator:4w3n40 |
| 4w3n40-26 | amana:refrigerator:4w3n40 |
| 4w3n40-27 | amana:refrigerator:4w3n40 |
| 4w3n40-28 | amana:refrigerator:4w3n40 |
| 4w3n40-29 | amana:refrigerator:4w3n40 |
| 4w3n40-30 | amana:refrigerator:4w3n40 |
| 4w3n40-31 | amana:refrigerator:4w3n40 |
| 4w3n40-32 | amana:refrigerator:4w3n40 |
| 4w3n40-33 | amana:refrigerator:4w3n40 |
| 4w3n40-34 | amana:refrigerator:4w3n40 |
| 4w3n40-35 | amana:refrigerator:4w3n40 |
| 4w3n40-36 | amana:refrigerator:4w3n40 |
| 4w3n40-37 | amana:refrigerator:4w3n40 |
| 4w3n40-38 | amana:refrigerator:4w3n40 |
When to call a technician
The line on these models is whether the fix is in front of the mould or behind it. Water supply, filter and bin are all reachable; the module, the thermostat and the heater are behind the ice maker and need it out.
The other symptoms covered for this family
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
