What this family is
The AQC freezer family covers six listings, AQC0501DRW through AQC0902DRW, and the table below is the whole of what the spine records about them. What dominates on this platform is cooling and temperature faults, with leaks and water on the floor behind it. The AQC listings pair off, each capacity appearing twice with a different trailing letter, and the pairs behave alike for this fault.
What goes wrong on these models
- Cooling and temperature faults — the cabinet is running continuously and still warming — See: Amana AQC Freezer: Not Cooling or Not Freezing.
- Leaks and water on the floor — beads of moisture on the outside of the cabinet — See: Amana AQC Freezer: Water Leak.
- Noise and vibration — a louder run after the cabinet was restocked — See: Amana AQC Freezer: Abnormal Noise or Vibration.
Problem classes in frequency order
- 1. Cooling and temperature faults — On these models the class is led by the door or lid gasket. Seals rank high because AQC pairs off by trim, and the door hardware is common to both halves of every pair.
- 2. Leaks and water on the floor — Led here by frost that has become water.
- 3. Noise and vibration — The usual answer in this class is the start relay and overload.
Models in the AQC family — The listings this family covers; it is a family page, not a model page.
Reference| Model number | Family key |
|---|---|
| AQC0501DRW | amana:freezer:aqc |
| AQC0501GRW | amana:freezer:aqc |
| AQC0701DRW | amana:freezer:aqc |
| AQC0701GRW | amana:freezer:aqc |
| AQC0902DRW | amana:freezer:aqc |
| AQC0902GRW | amana:freezer:aqc |
Problem classes on this family — Ordering only: no snapshot behind this family carries a counted denominator, so no share is printed.
General guidance| Problem class | Relative frequency on this family |
|---|---|
| Cooling and temperature faults | leading |
| Leaks and water on the floor | frequent |
| Noise and vibration | regular |
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel; a capacitor can hold a charge after the power is off. Empty a loaded cabinet before moving it, and clear frost with time rather than with a tool, because the evaporator tubing sits directly behind the cabinet wall.
Owner work and technician work
The owner-fixable end of this list is leaks and water on the floor and noise and vibration, which start with seals, filters, clearances and settings and need no panel off. The line is crossed as soon as a check needs a meter on live terminals, the sealed system opened, or the cabinet emptied and moved, and it is the same line on every listing in the table. No two AQC listings share a base number, so each one in the table is a distinct machine rather than a revision of its neighbour.
Other families of this brand
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
