Want a regional phone & address? Pick your area.
GE·Refrigeratorlow severity
GE Error Code PF
Power failure
Common Causes
- 1Power outage
- 2Tripped breaker
- 3Loose plug
Check food safety: discard perishables if freezer was above 40F for over 2 hours. Do not re-freeze fully thawed items.
Step-by-Step Troubleshooting
- 1
Press any button on the control panel to clear the PF code
- 2
Check outlet voltage with multimeter — should read 110-120V AC
- 3
Inspect power cord for damage or loose fit at outlet
- 4
Verify breaker is not tripped — reset if needed
- 5
Check GFCI outlet if applicable — press reset button
- 6
Monitor for recurring PF codes which indicate an intermittent power issue
Pro Diagnostic Tip
If PF appears repeatedly with no actual outage, the main board capacitors may be failing — measure voltage at board input pins. GE Profile French-doors are prone to this on boards manufactured 2019-2021.
You Might Also Notice
- •Display flashing after outage
- •Ice maker not restarting
- •Temperature climbing after power restore
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$0–$150
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WR55X31903 power cord (if damaged)WR55X10025 main control board (if PF recurs with stable power)
Do You Have the Right Tools?
Refrigerant gauges ($200+), vacuum pump ($250), leak detector ($150), and EPA-certified recovery equipment. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Check food temp after power restore
This repair requires specialized refrigerant handling equipment, EPA certification, and precise temperature diagnostics. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Refrigerant (R-134a/R-600a) requires EPA certification to handle. Improper discharge is a federal violation and health hazard. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code PF disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does GE error code PF mean?
GE error code PF indicates: Power failure. This is a low-severity issue affecting your refrigerator.
How do I fix GE error code PF?
Press any button on the control panel to clear the PF code Then, Check outlet voltage with multimeter — should read 110-120V AC Then, Inspect power cord for damage or loose fit at outlet There are 3 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my refrigerator has error PF?
Besides the error code on the display, common signs include: Display flashing after outage; Ice maker not restarting; Temperature climbing after power restore. If you notice any of these symptoms, check your refrigerator's display panel for error code PF.
How much does it cost to fix GE PF?
Repair costs for GE PF typically range from $0 to $150 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.