Want a regional phone & address? Pick your area.
Frigidaire·Refrigeratorhigh severity
Frigidaire Refrigerator Error Code SY CE
Communication error between boards
Common Causes
- 1Wiring harness failure
- 2Main control board fault
- 3UI board failure
Step-by-Step Troubleshooting
- 1
Power-cycle the unit for 5 minutes — SY CE can clear after a control reset
- 2
Inspect ribbon cable between UI board (door) and main board (rear) for damage
- 3
Check door hinge wire harness for pinched or broken wires
- 4
Reseat J1 connector on main board — corrosion here is the top cause
Pro Diagnostic Tip
Check J1 connector on main board for corrosion. Intermittent SY CE often resolves by reseating the ribbon cable between boards.
You Might Also Notice
- •Display blank or showing random characters
- •No response to temperature adjustments
- •Unit runs but ignores all settings
Parts, Cost & Difficulty
Repair Difficulty
Professional OnlyEstimated Repair Cost
$200–$450
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
5304514710 main control board242216806 user interface board242297905 wiring harness
Do You Have the Right Tools?
Refrigerant gauges ($200+), vacuum pump ($250), leak detector ($150), and EPA-certified recovery equipment. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Refrigerant (R-134a/R-600a) requires EPA certification to handle. Improper discharge is a federal violation and health hazard. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code SY CE is a high-severity issue that can cause further damage to your refrigerator if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Frigidaire error code SY CE mean?
Frigidaire error code SY CE indicates: Communication error between boards. This is a high-severity issue affecting your refrigerator.
How do I fix Frigidaire error code SY CE?
Power-cycle the unit for 5 minutes — SY CE can clear after a control reset Then, Inspect ribbon cable between UI board (door) and main board (rear) for damage Then, Check door hinge wire harness for pinched or broken wires There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my refrigerator has error SY CE?
Besides the error code on the display, common signs include: Display blank or showing random characters; No response to temperature adjustments; Unit runs but ignores all settings. If you notice any of these symptoms, check your refrigerator's display panel for error code SY CE.
How much does it cost to fix Frigidaire SY CE?
Repair costs for Frigidaire SY CE typically range from $200 to $450 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.