The short answer
On a Vezeni refrigerator the ranking below is the answer, and it is not the generic one. Most likely here — The cabinet is not standing level on its feet. Least likely, and a service call from the first minute — The start relay clicking in and out. The checks at the top of the list cost nothing and need no panel off.
What you actually observe
- A hum or buzz that comes and goes with the compressor — It starts when the unit starts and stops when it stops.
- A rattle that changes if you touch the cabinet — Something is resonating rather than failing.
- A scrape or tick that follows a fan — A regular, blade-speed sound rather than a steady hum.
- NEAR MISS: repeated clicking with no cooling at all — That is a start-relay fault, not a noise complaint, and it needs a different page.
Causes, most likely first on this build
- The cabinet is not standing level on its feet — A compressor shakes; that is its job. Feet that are not all carrying weight let the shake move the whole cabinet instead of being absorbed, and what you hear is the cabinet, not the compressor. Ranked first on a Vezeni: a countertop unit sits in the warmest air in the kitchen, right beside the things that make the kitchen warm.
- A tube touching the cabinet wall and drumming — The tubing at the back is meant to stand clear of everything. Second here, because a hand-filled, hand-emptied unit depends on the owner's routine more than on any part inside it.
- The drain pan underneath rattling — The pan under the cabinet is a thin tray sitting in clips. Third, once the two above are clean: it is free, immediate, and it decides whether this is a fault at all.
- The start relay clicking in and out — The relay that starts the compressor clicks once on each start. Last, and the reason the order above matters: it is the rarest cause and the only one that is not an owner fix on a unit this small.
Check in this order, and why
- Push gently at each top corner of the cabinet — Any movement at all means the feet are carrying the vibration instead of absorbing it.
- Look behind the cabinet at where the tubing runs — A tube resting on the shell or the wall is visible, and it is a free fix.
- Look underneath at the pan and press it back into its clips — A pan out of its clips buzzes with the compressor and nothing else.
What an owner can safely check
- Move the cabinet away from the oven, the dishwasher and any sunlit worktop — A countertop cabinet stands in the warmest air in the kitchen, beside the things that make the kitchen warm.
About 15 min
- Push each top corner of the cabinet and adjust the feet until nothing rocks — Levelling is free and it removes the single most common cause of a new noise.
Tools: an adjustable spannerAbout 15 min
- STOP HERE if the noise is inside the sealed system or needs a panel off with power on — That is where an owner check ends and a service call begins.
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel, because a capacitor can hold a charge after the power is off. Leave the door switch wired exactly as it is: it cuts power to the fan for a reason, and defeating it is never part of a diagnosis.
When to call a technician
Call when the noise survives a level check, a clear fan and an empty shelf, or as soon as it changes character: a rumble that rises with the compressor, or repeated clicking with no start, is a different thing from a rattle. Call immediately for a burning smell or visible oil at the compressor, and stop using the cabinet until someone has looked at it.
Where to go next in this class
What is deliberately not on this page
This page is written for the Vezeni refrigerator as a class, not for one family or model line. Where a family- or model-specific page exists for your cabinet it is linked above, and it is the more specific answer.
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
