Kenmore Dishwasher Error Codes — Complete Error Code Diagnosis Guide

Seven Kenmore dishwasher codes are decoded here, and they cover a full cycle from fill to drain. F6E1 is water not entering the tub — supply valve closed, inlet valve failed, or a float switch stuck up. F6E4 is the flow meter, whose turbine can be stuck by debris or simply not counting. F1E1 is the water temperature sensor. F7E1 is a circulation motor stalled, sometimes by a glass shard wedged in the impeller and sometimes by a weak start capacitor. F8E4 is the drain pump, F9E1 a drain that timed out, and F2E2 a console reading a stuck key.

The two drain codes are separated by what each accuses, and that keeps a reader from buying the wrong thing: F9E1 is about the path — a kinked hose, a disposal knockout plug still in place, a pump gone weak — while F8E4 is about the pump and the debris reaching it. The fill pair splits the same way, valve against meter. F2E2 is worth trying to solve with a dry console and a released pad before an interface board is ordered, since steam under an overlay mimics a failed panel.

A dishwasher is line voltage in a permanently wet enclosure, so the breaker goes off before the sump, the pump or a console tail is opened. The one code here that hides a sharp surprise is F7E1: a jammed impeller often means broken glass in the sump, which is a gloves-first job rather than a bare-hands one. Nothing on this list involves gas or refrigerant. EasyBear services Kenmore dishwashers across Sacramento and the Bay Area.