The short answer
On the Black Decker BCFK refrigerator a failed or slowing ice supply is usually the maker mechanism stalling at a specific point in its own cycle. BCFK spans several distinct stems, so the sequence below holds across the model list — but only after you have established whether your build makes ice automatically or from a tray, because that single fact voids half the list.
What you observe
- No ice at all, and the tray or mould is dry — Nothing is arriving.
- A solid block instead of cubes — Water arrived and then kept arriving, or the mould never released.
- Hollow, small or slow cubes — Partial fill or partial freeze: either the water is being cut short or the compartment is not cold enough to finish the cycle in time.
- NEAR MISS — no ice and a compartment that is not holding cold — Then ice is the symptom, not the fault.
Causes, most likely first on the BCFK family
- The control arm, shut-off or sensor — First on this family — BCFK spans several distinct stems — and the shut-off is the part most easily disturbed: a bin pushed in hard lifts the arm, a bag leans on the sensor, and production stops with everything else in perfect order.
- A mould or ejector stuck by a previous jam — Second. One oversized batch or a single slow fill leaves ice where the ejector sweeps, and the mechanism stalls in place rather than failing outright. Clearing it by hand often restores it permanently.
- Fill: tube, valve, line or tap — Third here, because an arm or a jam produces the same empty bin and costs nothing to check, while the water side needs the cabinet pulled out.
- Compartment temperature and frost — Last on this ranking: a cabinet that is otherwise holding food well is rarely the reason ice stopped, though it becomes the first suspect the moment the temperature is in any doubt.
Check in this order, and why
- Look at the arm or sensor before anything else — First because it is the single most common find and needs nothing but a look: anything resting on it stops production instantly.
- Empty the bin completely and inspect the mould — Second: a jam is visible once the bin is out, and clearing it is often the whole repair.
- Run one cycle and watch what the mechanism actually does — Third. Whether it fills and does not eject, or ejects and does not fill, splits the rest of the list in half.
- Then check supply and compartment temperature — Last of the owner checks, and only worth the effort once the mechanism has shown you which half of the fault it is.
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel — a capacitor can hold a charge after the power is off. Shut the water supply before disturbing a fill line, and never thaw a frozen fill tube with an open flame or a heat gun: warm water and patience are the only safe method on plastic tubing.
Models in the BCFK family
Reference| Model number | Family key |
|---|---|
| BCFK206 | black-decker:refrigerator:bcfk |
| BCFK276 | black-decker:refrigerator:bcfk |
| BCFK35 | black-decker:refrigerator:bcfk |
| BCFK35 | black-decker:refrigerator:bcfk |
| BCFK356 | black-decker:refrigerator:bcfk |
| BCFK356 | black-decker:refrigerator:bcfk |
| BCFK35W | black-decker:refrigerator:bcfk |
| BCFK51 | black-decker:refrigerator:bcfk |
| BCFK51 | black-decker:refrigerator:bcfk |
| BCFK516 | black-decker:refrigerator:bcfk |
| BCFK516 | black-decker:refrigerator:bcfk |
| BCFK55W | black-decker:refrigerator:bcfk |
| BCFK70 | black-decker:refrigerator:bcfk |
| BCFK70 | black-decker:refrigerator:bcfk |
| BCFK706 | black-decker:refrigerator:bcfk |
| BCFK706 | black-decker:refrigerator:bcfk |
| BCFK71 | black-decker:refrigerator:bcfk |
| BCFK716 | black-decker:refrigerator:bcfk |
| BCFK71W | black-decker:refrigerator:bcfk |
When to call a technician
Call when supply, temperature and the mechanism have all been checked and the maker still will not complete a cycle, or when a fill valve needs replacing and the plumbing behind the cabinet is not accessible to you. Call sooner if you find water under or behind the unit while chasing this: a leaking fill valve is a plumbing fault before it is an ice fault.
Other faults covered for the BCFK family
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
