Start here
This is the profile page for the Alpicool NX line. The NX line covers three models, listed in the table below, and they share a platform. It says what the line is and sends you to the fault you have, rather than repeating those diagnostics.
What goes wrong on this line, and where to go next
- Water inside the cabinet or on the floor — A puddle at the door line, or standing water in the channel. See: Alpicool NX Refrigerator: Water Leak. — Slug: alpicool-alpicool-refrigerator-nx-refrigerator-water-leak — Title: Alpicool NX Refrigerator: Water Leak
- A new noise or a vibration — A knock at each start, or a rattle within a run. See: Alpicool NX Refrigerator: Abnormal Noise or Vibration. — Slug: alpicool-alpicool-refrigerator-nx-refrigerator-abnormal-noise — Title: Alpicool NX Refrigerator: Abnormal Noise or Vibration
- Runs but will not get or stay cold — The compressor runs and the cabinet never comes down. See: Alpicool NX Refrigerator: Not Cooling or Not Freezing. — Slug: alpicool-alpicool-refrigerator-nx-refrigerator-cooling-failure — Title: Alpicool NX Refrigerator: Not Cooling or Not Freezing
- Ice that is not being made — An empty bin, or cubes that never complete. See: Alpicool NX Refrigerator: Ice Maker Fault. — Slug: alpicool-alpicool-refrigerator-nx-refrigerator-ice-production — Title: Alpicool NX Refrigerator: Ice Maker Fault
The classes, most frequent first
- Water inside the cabinet or on the floor — Leading class here: its two commonest causes are both owner work.
- A new noise or a vibration — Second: a light cabinet is moved by its own compressor.
- Runs but will not get or stay cold — Third: owners act on a warm cabinet fastest, whatever is behind it.
- Ice that is not being made — Fourth: an empty bin is often a setting rather than a fault.
Models in the NX family
Reference| Model number | Family key |
|---|---|
| NX42 | alpicool:refrigerator:nx |
| NX52 | alpicool:refrigerator:nx |
| NX62 | alpicool:refrigerator:nx |
How the classes rank here — No denominator: this line has no recorded fault shares, so each class carries a position, not a rate.
General guidance| Problem class | Position on this line | Measured share |
|---|---|---|
| Water inside the cabinet or on the floor | leading class | no measured share available |
| A new noise or a vibration | second | no measured share available |
| Runs but will not get or stay cold | third | no measured share available |
| Ice that is not being made | fourth | no measured share available |
Before any panel comes off
Safety
Unplug the appliance or switch off its breaker before removing any panel: a capacitor can hold a charge after the power is off. Never open pipework or work on the sealed system.
Where owner work ends on this line
Clearing the drain and checking the gasket are owner work. The same rule holds for every class above: what is reachable without a panel is owner work, and what is behind one is not.
Other families of this brand
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
