Gas burner clicking but won't light? We fix igniters, spark modules, and gas valves. Same-day service, 90-day warranty. Average repair cost: $80–$250. Some causes are DIY-fixable — see below.
Gas burner ignition issues in San Rafael benefit from the Marin County warmth pocket — significantly warmer and drier than coastal Marin, with summer highs reaching 83°F. Igniters stay drier than in foggy Sausalito just a few miles south. Marin Municipal Water District very soft water at 35 ppm TDS produces virtually no mineral deposits from boil-overs. When ignition failures occur, they typically stem from gas infrastructure age in the diverse housing stock that ranges from 1920s downtown bungalows to 1960s Terra Linda tract homes. Lucas Valley hillside homes may have long gas line runs from the street to elevated kitchens, creating pressure loss. The Canal neighborhood's density and heavy cooking activity produces more grease-related igniter issues than other districts. Hilly terrain in Lucas Valley and Dominican areas can complicate technician access for large appliance service.
San Rafael's Marin warmth pocket keeps igniters drier than coastal Marin. Very soft MMWD water at 35 ppm TDS eliminates mineral deposit concerns. Diverse housing stock from 1920s to 1960s creates variable gas infrastructure quality. Lucas Valley hillside homes have long gas line runs reducing pressure. Canal neighborhood heavy cooking increases grease-related igniter issues. Hilly terrain complicates technician access.
Clogged igniter port
Failed spark module
Wet igniter
Faulty gas valve
Broken spark electrode
Normal wear on internal parts is the leading cause of gas stove burner wont ignite issues. Regular use over 5-10 years gradually degrades moving parts and seals.
Cost: $140–$270 | Time: 60-90 minutes
Control board malfunctions, faulty sensors, or wiring issues can cause burner wont ignite symptoms. Power surges and age-related degradation are typical triggers.
Cost: $168–$320 | Time: 45-75 minutes
Debris, mineral deposits, or foreign objects can restrict normal operation. This is often preventable with regular maintenance.
Cost: $140–$210 | Time: 30-60 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $80–$250 |
| Repair time | 45 min-1.5 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
Gas ignition repairs cost $80-$250 in the Bay Area, with possible hillside access surcharges. San Rafael's very soft water means mineral cleaning is unnecessary — focus is on gas pressure and grease removal. Hills homes may need gas pressure booster installation ($200-$400).
In San Rafael, wide day-night temperature swings (30f+ delta) stress thermal expansion joints, thermostat cycling, and sealed-system pressures. This can affect your appliance's flex gas connector: thermal cycling fatigues the corrugated stainless steel gas connector, increasing the risk of micro-cracks at the flare fitting Have the gas connector inspected during annual service; replace corrugated connectors every 10 years proactively
In San Rafael, very low mineral content (<60 ppm tds) or sodium-softened water causes over-sudsing, rubber swelling, and reduced detergent rinsing. This can affect your appliance's oven interior: soft water steam clean cycles leave a sodium residue film on interior surfaces that can smoke during subsequent cooking Use distilled water for steam clean functions; wipe interior with a damp cloth after the cycle completes
Free diagnostic visit for burner won't ignite issues. Same-day appointments available in San Rafael.
Book Free DiagnosticReviewed by Diana Kowalski, Laundry Systems Specialist