Gas burner clicking but won't light? We fix igniters, spark modules, and gas valves. Same-day service, 90-day warranty. Average repair cost: $80–$250. Some causes are DIY-fixable — see below.
Gas Stove burner won't ignite repair typically costs $80 to $250. Some causes are DIY-fixable, but professional diagnosis is recommended if the problem persists. Most repairs are completed in 45 min-1.5 hours with a free diagnostic visit.
Mountain View gas stove ignition failures typically trace to the dry, warm Silicon Valley climate and the rapid transformation of the city's housing stock. Original 1950s ranch homes near downtown are being gut-renovated with premium European appliance packages, while North Bayshore adds dense residential construction near the Google campus. Summer highs reach 84 degrees with very low humidity and rare fog, making dust the primary culprit in igniter assembly contamination. Mountain View's blended water supply at 250 TDS deposits minerals around burner orifices at a moderate rate. With 10 appliance repair competitors serving 82,376 residents and the Google campus proximity driving high-end kitchen installations in nearby homes, technicians here encounter everything from aging ranch home Samsung stoves to newly installed Wolf and Thermador ranges with proprietary ignition systems requiring specialized diagnostic tools.
Mountain View's 82,376 residents live in a rapidly evolving housing market where original 1965-vintage ranch homes sit next to complete renovations featuring luxury appliance suites. The dry climate with rare fog keeps moisture corrosion minimal, but 250 TDS water hardness deposits minerals at a moderate rate. Older ranch homes with original wiring may need panel upgrades for modern electronic ignition systems, particularly when renovations add multiple high-draw appliances to circuits designed for 1960s loads. The Google campus drives premium brand adoption in nearby neighborhoods.
Clogged igniter port
Failed spark module
Wet igniter
Faulty gas valve
Broken spark electrode
The spark igniter tip accumulates grease and food residue from daily cooking, insulating the spark gap. Bay Area humidity deposits a moisture film on the ceramic insulator, further reducing spark strength. Heavy cooking households in the Bay Area may need igniter cleaning every 6-12 months.
Cost: $60–$150 | Time: 30-60 minutes
The tiny holes around the burner cap clog with food debris, boil-over residue, and grease. Even if the igniter sparks, gas cannot reach the spark point for ignition. In busy Bay Area kitchens where multiple burners run simultaneously, boil-overs are frequent and clog ports of adjacent burners.
Cost: $60–$120 | Time: 30-45 minutes
The spark module generates high-voltage pulses to all igniters simultaneously. When it fails, some or all burners won't spark. PG&E power fluctuations in older Bay Area homes can damage the module. If no burners click, the spark module has likely failed rather than individual igniters.
Cost: $100–$220 | Time: 45-75 minutes
The gas valve for a specific burner can stick closed or the PG&E gas supply pressure may be low. Older Bay Area homes with original gas lines sometimes have restricted flow from pipe corrosion. The igniter clicks and sparks, but no gas reaches the burner for ignition.
Cost: $120–$280 | Time: 45-90 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $80–$250 |
| Repair time | 45 min-1.5 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
Standard ignition repairs in Mountain View cost $80 to $250, with premium brand service adding 30 to 50 percent. The 10 local competitors include general technicians and premium brand specialists. Bay Area labor rates of $75 to $150 per hour apply, with most igniter replacements completing in under an hour for standard brands.
In Mountain View, wide day-night temperature swings (30f+ delta) stress thermal expansion joints, thermostat cycling, and sealed-system pressures. This can affect your appliance's flex gas connector: thermal cycling fatigues the corrugated stainless steel gas connector, increasing the risk of micro-cracks at the flare fitting Have the gas connector inspected during annual service; replace corrugated connectors every 10 years proactively
Free diagnostic visit for burner won't ignite issues. Same-day appointments available in Mountain View.
Book Free DiagnosticReviewed by James Okonkwo, Kitchen Appliance & Gas Systems Technician