Gas burner clicking but won't light? We fix igniters, spark modules, and gas valves. Same-day service, 90-day warranty. Average repair cost: $80–$250. Some causes are DIY-fixable — see below.
Gas Stove burner won't ignite repair typically costs $80 to $250. Some causes are DIY-fixable, but professional diagnosis is recommended if the problem persists. Most repairs are completed in 45 min-1.5 hours with a free diagnostic visit.
Loomis's soft water at 80 TDS from Placer County Water Agency surface water eliminates mineral port clogging as an ignition concern — placing it alongside Granite Bay and the foothills cities as the most favorable locations for gas stove maintenance. The custom rural homes built around 1988 along Brace Road, Taylor Road corridor, and near Sierra College feature a mix of mid-range and premium gas appliances with better-than-builder-grade ignition components. These custom homes are now 35+ years old, and while the better original components last longer, they are approaching the end of their reliable service window. Loomis's rural character means some properties have longer gas supply runs from PG&E meters to kitchens, and these longer runs can experience pressure drops — especially if original pipe sizing was marginal. The 96°F summer heat is slightly cooler than valley cities, moderating grease splatter. Power outages from winter storms are more common than in the valley, posing surge risk to spark modules.
Loomis's 80 TDS water eliminates mineral port clogging — among the metro's best conditions. Custom homes from 1988 have better-than-builder-grade components approaching 35+ years. Rural lot sizes mean longer gas supply runs with potential pressure drops. Slightly cooler 96°F summers moderate grease splatter. More frequent storm-related power outages pose surge risk.
Clogged igniter port
Failed spark module
Wet igniter
Faulty gas valve
Broken spark electrode
The spark igniter accumulates cooking residue that insulates the spark gap. Sacramento households that cook daily (especially high-heat searing and stir-frying) coat igniters faster. Unlike coastal areas, Sacramento's dry climate means the igniter itself isn't moisture-affected, but grease and carbon buildup is worse.
Cost: $60–$150 | Time: 30-60 minutes
Boil-over liquids carry dissolved minerals from Sacramento hard water that dry into rock-hard deposits in burner ports. These mineral plugs are harder to remove than food residue. The igniter sparks but gas cannot reach the flame through blocked ports. Multiple blocked ports prevent ignition entirely.
Cost: $60–$120 | Time: 30-45 minutes
The spark module powers all igniters simultaneously. SMUD power surges during Sacramento summer peaks damage its internal circuitry. When the module fails, no burners click when turned to the light position. Testing: if you hear no clicking from any burner, the module is the culprit.
Cost: $100–$220 | Time: 45-75 minutes
The individual burner valve may stick partially closed from internal corrosion or grease. Sacramento homes that don't use certain burners regularly (back burners) see this more. The igniter clicks and sparks but insufficient gas reaches the burner for ignition.
Cost: $120–$280 | Time: 45-90 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $80–$250 |
| Repair time | 45 min-1.5 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
Loomis ignition repairs at $80-$250 through 3 local competitors benefit from soft water simplifying diagnostics. Samsung leads metro data. The small competitor pool means longer wait times — preventive maintenance and surge protection are particularly important for Loomis homeowners who may wait longer for emergency service.
In Loomis, sustained high temperatures with low humidity cause thermal stress on mechanical components and accelerate rubber degradation. This can affect your appliance's safety valve: heat expansion affects valve timing, causing delayed ignition with gas buildup, which produces a small "poof" at light-off If ignition takes longer than 4 seconds, stop and let the gas dissipate before retrying; schedule a valve inspection
In Loomis, wide day-night temperature swings (30f+ delta) stress thermal expansion joints, thermostat cycling, and sealed-system pressures. This can affect your appliance's flex gas connector: thermal cycling fatigues the corrugated stainless steel gas connector, increasing the risk of micro-cracks at the flare fitting Have the gas connector inspected during annual service; replace corrugated connectors every 10 years proactively
Free diagnostic visit for burner won't ignite issues. Same-day appointments available in Loomis.
Book Free DiagnosticReviewed by James Okonkwo, Kitchen Appliance & Gas Systems Technician