Gas burner clicking but won't light? We fix igniters, spark modules, and gas valves. Same-day service, 90-day warranty. Average repair cost: $80–$250. Some causes are DIY-fixable — see below.
Gas Stove burner won't ignite repair typically costs $80 to $250. Some causes are DIY-fixable, but professional diagnosis is recommended if the problem persists. Most repairs are completed in 45 min-1.5 hours with a free diagnostic visit.
Granite Bay's exceptionally soft water at 80 TDS from the San Juan Water District's Folsom Lake supply virtually eliminates mineral port clogging as an ignition failure factor — a significant advantage over the harder-water Sacramento suburbs. The custom estate homes built around 1998 in Los Lagos, Oak Lakes, and along Douglas Boulevard feature premium gas appliances with high-quality ignition components in spacious 2,800 square foot kitchens that provide excellent ventilation. Ignition failures in Granite Bay are almost exclusively caused by grease contamination from daily cooking, and the wider spark gaps on premium igniters tolerate more contamination before failing. The 98°F summer heat drives heavy cooking, but the well-appointed kitchens typically have powerful range hoods that mitigate grease accumulation. PG&E gas supply to these higher-value properties is consistently strong. The primary Granite Bay-specific concern is the expense of replacement parts for premium and professional-grade gas appliances — components cost significantly more than standard builder-grade equivalents.
Granite Bay's 80 TDS water eliminates mineral port clogging — among the metro's most favorable conditions. Custom estate kitchens with premium appliances have higher-quality ignition components with longer service life. Spacious 2,800 sq ft kitchens with powerful ventilation reduce grease accumulation. PG&E gas supply is strong. Premium appliance parts cost significantly more than standard equivalents.
Clogged igniter port
Failed spark module
Wet igniter
Faulty gas valve
Broken spark electrode
The spark igniter accumulates cooking residue that insulates the spark gap. Sacramento households that cook daily (especially high-heat searing and stir-frying) coat igniters faster. Unlike coastal areas, Sacramento's dry climate means the igniter itself isn't moisture-affected, but grease and carbon buildup is worse.
Cost: $60–$150 | Time: 30-60 minutes
Boil-over liquids carry dissolved minerals from Sacramento hard water that dry into rock-hard deposits in burner ports. These mineral plugs are harder to remove than food residue. The igniter sparks but gas cannot reach the flame through blocked ports. Multiple blocked ports prevent ignition entirely.
Cost: $60–$120 | Time: 30-45 minutes
The spark module powers all igniters simultaneously. SMUD power surges during Sacramento summer peaks damage its internal circuitry. When the module fails, no burners click when turned to the light position. Testing: if you hear no clicking from any burner, the module is the culprit.
Cost: $100–$220 | Time: 45-75 minutes
The individual burner valve may stick partially closed from internal corrosion or grease. Sacramento homes that don't use certain burners regularly (back burners) see this more. The igniter clicks and sparks but insufficient gas reaches the burner for ignition.
Cost: $120–$280 | Time: 45-90 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $80–$250 |
| Repair time | 45 min-1.5 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
Granite Bay ignition repairs at $80-$250 through 4 local competitors may exceed the standard range for premium appliance components — Viking, Wolf, and Thermador igniters and modules cost 2-3x more than standard parts. Samsung leads metro data overall, but Granite Bay's appliance mix skews toward professional-grade brands. The soft water and premium components mean ignition calls are less frequent overall.
In Granite Bay, sustained high temperatures with low humidity cause thermal stress on mechanical components and accelerate rubber degradation. This can affect your appliance's safety valve: heat expansion affects valve timing, causing delayed ignition with gas buildup, which produces a small "poof" at light-off If ignition takes longer than 4 seconds, stop and let the gas dissipate before retrying; schedule a valve inspection
In Granite Bay, wide day-night temperature swings (30f+ delta) stress thermal expansion joints, thermostat cycling, and sealed-system pressures. This can affect your appliance's flex gas connector: thermal cycling fatigues the corrugated stainless steel gas connector, increasing the risk of micro-cracks at the flare fitting Have the gas connector inspected during annual service; replace corrugated connectors every 10 years proactively
Free diagnostic visit for burner won't ignite issues. Same-day appointments available in Granite Bay.
Book Free DiagnosticReviewed by Robert Aguilar, Field Service Manager & Technical Reviewer