Want a regional phone & address? Pick your area.
Miele·Washermedium severity
Miele Error Code F10
Water intake valve error
Common Causes
- 1Water tap closed
- 2Inlet hose kinked
- 3Inlet valve filter clogged
Always turn off water supply before disconnecting hoses. Miele WPS hoses contain an electrical shutoff — do not splice or modify.
Step-by-Step Troubleshooting
- 1
Verify both hot and cold supply valves are fully open
- 2
Disconnect inlet hoses and clean the mesh filter screens
- 3
Check household water pressure (Miele requires 15-145 PSI)
- 4
Inspect Waterproof System (WPS) inlet hose for swelling
- 5
Test inlet valve solenoids with multimeter for continuity
Pro Diagnostic Tip
Miele W1 washers with WiFiConn@ct log the exact fill time. If fill takes longer than the programmed timeout, F10 triggers. Check the Miele@home app log before disassembling.
You Might Also Notice
- •Washer does not fill
- •Very slow fill
- •Cycle does not start
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$200–$400
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Water inlet valve assemblyWPS inlet hoseFilter screens
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Check water supply taps
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F10 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Miele error code F10 mean?
Miele error code F10 indicates: Water intake valve error. This is a medium-severity issue affecting your washer.
How do I fix Miele error code F10?
Verify both hot and cold supply valves are fully open Then, Disconnect inlet hoses and clean the mesh filter screens Then, Check household water pressure (Miele requires 15-145 PSI) There are 2 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer has error F10?
Besides the error code on the display, common signs include: Washer does not fill; Very slow fill; Cycle does not start. If you notice any of these symptoms, check your washer's display panel for error code F10.
How much does it cost to fix Miele F10?
Repair costs for Miele F10 typically range from $200 to $400 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.