Want a regional phone & address? Pick your area.
Miele·Dishwasherhigh severity
Miele Error Code F01
Temperature sensor short circuit
Common Causes
- 1NTC sensor shorted
- 2Wiring damage
- 3Water ingress on sensor
Miele dishwashers use proprietary NTC sensors. Generic replacements may have incorrect resistance curves causing poor wash performance.
Step-by-Step Troubleshooting
- 1
Power off and unplug the dishwasher
- 2
Access the NTC temperature sensor (behind inner door panel)
- 3
Measure sensor resistance with multimeter (should be ~5k ohms at room temp)
- 4
Check wiring harness for moisture or corrosion
- 5
Replace NTC sensor if reading near 0 ohms (shorted)
Pro Diagnostic Tip
A shorted NTC reads near 0 ohms. On Miele units with WiFiConn@ct, check the diagnostic log via the Miele@home app for exact sensor readings before disassembly.
You Might Also Notice
- •Cycle stops mid-wash
- •No heating during wash
- •Error appears immediately at cycle start
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$250–$450
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Miele NTC temperature sensorWiring harness (if corroded)
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code F01 is a high-severity issue that can cause further damage to your dishwasher if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Miele error code F01 mean?
Miele error code F01 indicates: Temperature sensor short circuit. This is a high-severity issue affecting your dishwasher.
How do I fix Miele error code F01?
Power off and unplug the dishwasher Then, Access the NTC temperature sensor (behind inner door panel) Then, Measure sensor resistance with multimeter (should be ~5k ohms at room temp) There are 2 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my dishwasher has error F01?
Besides the error code on the display, common signs include: Cycle stops mid-wash; No heating during wash; Error appears immediately at cycle start. If you notice any of these symptoms, check your dishwasher's display panel for error code F01.
How much does it cost to fix Miele F01?
Repair costs for Miele F01 typically range from $250 to $450 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.