Want a regional phone & address? Pick your area.
Maytag·Ovenmedium severity
Maytag Error Code F3-E0
Oven sensor open
Common Causes
- 1Oven temperature sensor failed
- 2Connector loose at rear of range
- 3Wire damaged from heat
Step-by-Step Troubleshooting
- 1
Unplug range and access the sensor connector at the rear
- 2
Test sensor resistance — should read ~1080 ohms at room temperature
- 3
If open (infinite), replace the sensor probe
- 4
If reading is normal, check wiring from sensor to board
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$50–$175
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Oven temperature sensor (RTD probe)
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Diagnose the root cause, test affected components with calibrated meters, replace faulty parts with OEM replacements, and verify proper operation through a full test cycle.
This repair requires combustion analyzers, gas pressure manometers, and temperature calibration instruments. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F3-E0 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Maytag error code F3-E0 mean?
Maytag error code F3-E0 indicates: Oven sensor open. This is a medium-severity issue affecting your oven.
How do I fix Maytag error code F3-E0?
Unplug range and access the sensor connector at the rear Then, Test sensor resistance — should read ~1080 ohms at room temperature Then, If open (infinite), replace the sensor probe There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How much does it cost to fix Maytag F3-E0?
Repair costs for Maytag F3-E0 typically range from $50 to $175 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.