Want a regional phone & address? Pick your area.
Hotpoint·Ovenmedium severity
Hotpoint Error Code F3
Oven sensor open
Common Causes
- 1Sensor failed open
- 2Connector loose
- 3Wire broken
Step-by-Step Troubleshooting
- 1
Access rear of range
- 2
Test sensor — should read ~1080 ohms
- 3
If open, replace sensor
- 4
If normal, check wiring to board
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$50–$150
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Oven temperature sensor
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Diagnose the root cause, test affected components with calibrated meters, replace faulty parts with OEM replacements, and verify proper operation through a full test cycle.
This repair requires combustion analyzers, gas pressure manometers, and temperature calibration instruments. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F3 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Hotpoint error code F3 mean?
Hotpoint error code F3 indicates: Oven sensor open. This is a medium-severity issue affecting your oven.
How do I fix Hotpoint error code F3?
Access rear of range Then, Test sensor — should read ~1080 ohms Then, If open, replace sensor There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How much does it cost to fix Hotpoint F3?
Repair costs for Hotpoint F3 typically range from $50 to $150 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.