Want a regional phone & address? Pick your area.
Frigidaire·Dishwashermedium severity
Frigidaire Error Code i10
Water fill timeout
Common Causes
- 1Water supply valve closed
- 2Inlet hose kinked
- 3Inlet valve filter clogged
- 4Water inlet valve failure
Step-by-Step Troubleshooting
- 1
Verify water supply valve under sink is fully open
- 2
Check inlet hose for kinks
- 3
Clean inlet valve filter screen
- 4
Test water pressure at supply
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$75–$200
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Water inlet valve
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Check water supply valve is open
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code i10 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Frigidaire error code i10 mean?
Frigidaire error code i10 indicates: Water fill timeout. This is a medium-severity issue affecting your dishwasher.
How do I fix Frigidaire error code i10?
Verify water supply valve under sink is fully open Then, Check inlet hose for kinks Then, Clean inlet valve filter screen There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How much does it cost to fix Frigidaire i10?
Repair costs for Frigidaire i10 typically range from $75 to $200 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.