Want a regional phone & address? Pick your area.
Frigidaire·Washermedium severity
Frigidaire Error Code E11
Fill time exceeded
Common Causes
- 1Water supply valves closed
- 2Kinked inlet hoses
- 3Clogged inlet screens
- 4Low water pressure
- 5Failed water inlet valve
Step-by-Step Troubleshooting
- 1
Verify both hot and cold water faucets are fully open
- 2
Check inlet hoses for kinks or pinches
- 3
Clean the inlet valve screens (small mesh filters at hose connection)
- 4
Test water pressure — should be 20-120 PSI
- 5
If screens are clear and pressure is good, inlet valve may need replacement
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$75–$225
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Water inlet valveInlet screens
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Check water supply valves are fully open
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code E11 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Frigidaire error code E11 mean?
Frigidaire error code E11 indicates: Fill time exceeded. This is a medium-severity issue affecting your washer.
How do I fix Frigidaire error code E11?
Verify both hot and cold water faucets are fully open Then, Check inlet hoses for kinks or pinches Then, Clean the inlet valve screens (small mesh filters at hose connection) There are 2 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How much does it cost to fix Frigidaire E11?
Repair costs for Frigidaire E11 typically range from $75 to $225 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.