Expert advice, troubleshooting guides, and maintenance tips for all your appliances
5,493 articles
Or call (415) 795-7300

Miele dishwasher F78 is a seized circulation pump — impeller jammed, winding fault, or bearing seizure. Why it is professional-only, plus costs.

Miele dryer F32 is a condenser-fan fault — the fan that cools the condenser has stalled or failed. Costs, airflow checks, and when it needs a pro.

Miele dryer F39 is an electronic fault — a control-board failure, often after a power surge. A professional-only repair; what it means and costs.

Miele dryer F50 is a drum-motor fault — winding failure, thermal overload, or a capacitor issue stopping the drum. Costs and safe first checks.

Miele dryer F55 means the outlet filter or airflow is blocked — usually lint. A genuinely DIY fix: clean the filters and vent. Costs for the rare part.

Miele washer F10 is a water-intake fault — the drum is not filling in time. Check the tap and inlet filter first. Costs and the order I diagnose.

A coin riding in the impeller and a filter packed with lint are the same code and two different jobs. What you heard on the last spin, and how much water the flap gives up, tells you which — before the towels are even down.

Miele washer F19 is a flow-meter fault — the sensor counting water in has failed. Why it needs a technician, plus repair costs and safe first checks.

Miele washer F20 is a heating timeout — the water never reached temperature in time. Usually a failed heating element. Costs and diagnostic order.

Miele washer F29 is a heating-relay fault on the control board — a professional-only repair. What it means, why not to DIY, and typical costs.

Miele washer F34/F35 is a door-lock fault — the machine cannot confirm the door is locked, so it will not run. Check the latch first; costs explained.

Miele washer F39 is an electronic fault — a control-board failure, often after a power surge. A professional-only repair; what it means and costs.

Miele washer F50 is a motor-speed error — the drive motor cannot reach commanded speed, often from worn brushes or an inverter fault. Costs inside.

Miele washer F53 is a motor-tachometer error — the board has lost the sensor reading of drum speed. Distinct from a motor fault; costs and checks.

Miele washer F56 means spin speed stayed too low — often just an unbalanced load. Redistribute the washing first; costs and when it is a real fault.

Miele washer F81 is suds detection — too much foam from over-dosing detergent. A no-parts fix in most cases; how to clear it and the rare cost.

Miele washer F92 is a mould-risk warning — moisture and a shut door are breeding conditions in the drum. How to clear it and keep it away; costs.

Speed Queen Dryer E1 Error Code — meaning, likely causes, DIY checks, repair cost, and whether it is worth fixing.

Speed Queen Dryer E4 Error Code — meaning, likely causes, DIY checks, repair cost, and whether it is worth fixing.

Speed Queen Dryer HL Error Code — meaning, likely causes, DIY checks, repair cost, and whether it is worth fixing.

Speed Queen Dryer tH Error Code — meaning, likely causes, DIY checks, repair cost, and whether it is worth fixing.

Speed Queen Washer dL Error Code — meaning, likely causes, DIY checks, repair cost, and whether it is worth fixing.

Speed Queen Washer E3 Error Code — meaning, likely causes, DIY checks, repair cost, and whether it is worth fixing.

E1 on a Sub-Zero & Wolf dishwasher means water leak detected. Causes, repair cost ($350–$700), safe DIY checks, and when to call a technician.

E2 on a Sub-Zero & Wolf dishwasher means drain error. Causes, repair cost ($250–$550), safe DIY checks, and when to call a technician.

E3 on a Sub-Zero & Wolf dishwasher means fill timeout. Causes, repair cost ($300–$550), safe DIY checks, and when to call a technician.

E4 on a Sub-Zero & Wolf dishwasher means temperature sensor failure. Causes, repair cost ($350–$700), safe DIY checks, and when to call a technician.

E5 on a Sub-Zero & Wolf dishwasher means heater error. Causes, repair cost ($400–$750), safe DIY checks, and when to call a technician.

F1 on a Sub-Zero & Wolf oven/range means door latch/sensor communication error. Causes, repair cost ($300–$600), safe DIY checks, and when to call a technician.

F2 on a Sub-Zero & Wolf oven/range means unsafe heat levels detected. Causes, repair cost ($400–$900), safe DIY checks, and when to call a technician.
Let our professional technicians help. Same-day service available.