Electrolux Washer (kenmore) Error Codes — Complete Error Code Diagnosis Guide

Kenmore washers built by Electrolux show the same faults as their Electrolux siblings under different labels, and these eight guides are the translation. FL is the Kenmore rendering of E44, a door lock stuck in the locked position. Ld is E21, a long drain. LF is E11, a fill that timed out. dL shares its mechanism with E41, a lock that will not engage. The remaining four — lid, oL, Sd and uL — are a lid switch that cannot confirm the lid is shut, an overload, suds, and a load too unbalanced to reach spin speed.

Knowing which Electrolux code a Kenmore display is standing in for is most of the diagnosis, because the parts and the check order come from the platform, not from the badge. Each guide names both labels for that reason, then works the fault the ordinary way: a power cycle at the breaker to prove the code is real, the free mechanical checks, then the component. Four of the eight resolve without a part at all, since lid position, load size, load balance and detergent dose are things the machine is reporting rather than suffering from.

The lock codes are the ones worth patience. FL leaves a door that will not open with a drum that may still hold water, and forcing a locked door damages the strike and the latch it was reporting on. Draining through the filter cap first is the calmer route. The motor and control side is line-voltage work; there is no gas and no refrigerant here. EasyBear services Electrolux-built Kenmore washers across Sacramento and the Bay Area.