Gas burner clicking but won't light? We fix igniters, spark modules, and gas valves. Same-day service, 90-day warranty. Average repair cost: $80–$250. Some causes are DIY-fixable — see below.
Gas Stove burner won't ignite repair typically costs $80 to $250. Some causes are DIY-fixable, but professional diagnosis is recommended if the problem persists. Most repairs are completed in 45 min-1.5 hours with a free diagnostic visit.
Davis's moderate water hardness at 200 TDS from Sacramento River surface water creates light mineral deposits in gas stove burner ports from boil-overs — manageable with regular cleaning. The 1980-era ranch and suburban homes in South Davis, Mace Ranch, and Wildhorse have gas stoves now 40+ years into service with ignition components approaching the end of their reliable service window. The university community's strong cooking culture — including international cuisine requiring intensive stovetop technique — generates heavier-than-average grease contamination on igniters. Summer temperatures reaching 100°F in the Central Valley heat drive heavy cooking loads. Downtown Davis and West Davis have some older properties with vintage gas infrastructure that may restrict supply pressure. PG&E gas supply is reliable throughout Davis, and the dry climate means contamination rather than moisture is the primary ignition failure cause. Davis's environmentally conscious community may prefer thorough cleaning over component replacement when possible.
Davis's 200 TDS water creates light mineral deposits manageable with regular cleaning. The university community's intensive cooking culture generates heavier grease contamination. The 1980 housing stock has aging ignition components. Downtown and West Davis have older properties with potential gas infrastructure limitations. The 100°F valley heat drives heavy cooking loads.
Clogged igniter port
Failed spark module
Wet igniter
Faulty gas valve
Broken spark electrode
The spark igniter accumulates cooking residue that insulates the spark gap. Sacramento households that cook daily (especially high-heat searing and stir-frying) coat igniters faster. Unlike coastal areas, Sacramento's dry climate means the igniter itself isn't moisture-affected, but grease and carbon buildup is worse.
Cost: $60–$150 | Time: 30-60 minutes
Boil-over liquids carry dissolved minerals from Sacramento hard water that dry into rock-hard deposits in burner ports. These mineral plugs are harder to remove than food residue. The igniter sparks but gas cannot reach the flame through blocked ports. Multiple blocked ports prevent ignition entirely.
Cost: $60–$120 | Time: 30-45 minutes
The spark module powers all igniters simultaneously. SMUD power surges during Sacramento summer peaks damage its internal circuitry. When the module fails, no burners click when turned to the light position. Testing: if you hear no clicking from any burner, the module is the culprit.
Cost: $100–$220 | Time: 45-75 minutes
The individual burner valve may stick partially closed from internal corrosion or grease. Sacramento homes that don't use certain burners regularly (back burners) see this more. The igniter clicks and sparks but insufficient gas reaches the burner for ignition.
Cost: $120–$280 | Time: 45-90 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $80–$250 |
| Repair time | 45 min-1.5 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
Davis ignition repairs at $80-$250 through 5 local competitors serve a community that values thorough diagnostics. Samsung leads metro data. The university community's diverse appliance mix includes international brands that may require specialized parts sourcing.
In Davis, sustained high temperatures with low humidity cause thermal stress on mechanical components and accelerate rubber degradation. This can affect your appliance's safety valve: heat expansion affects valve timing, causing delayed ignition with gas buildup, which produces a small "poof" at light-off If ignition takes longer than 4 seconds, stop and let the gas dissipate before retrying; schedule a valve inspection
In Davis, wide day-night temperature swings (30f+ delta) stress thermal expansion joints, thermostat cycling, and sealed-system pressures. This can affect your appliance's flex gas connector: thermal cycling fatigues the corrugated stainless steel gas connector, increasing the risk of micro-cracks at the flare fitting Have the gas connector inspected during annual service; replace corrugated connectors every 10 years proactively
Free diagnostic visit for burner won't ignite issues. Same-day appointments available in Davis.
Book Free DiagnosticReviewed by Sarah Chen, Appliance Diagnostics Engineer