Verified
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
Mark S.
Dryer Repair
Dryer running but not heating? We fix heating elements, thermal fuses, and igniters. Same-day service, 90-day warranty. Average repair cost: $100–$350. Professional service recommended.
LG dryer was taking three cycles to dry a single load in Walnut Creek. Turned out the vent was 80% blocked with lint — technician cleared the full run and replaced the moisture sensor. Dries in one cycle now.
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
“Dryer was taking 3 cycles to dry a single load. Turned out the vent was clogged and the heating element was partially burned out. Both fixed in one visit.”
Burned out heating element
Blown thermal fuse
Faulty gas igniter
Failed thermostat
Restricted vent
Normal wear on internal parts is the leading cause of dryer dryer not heating issues. Regular use over 5-10 years gradually degrades moving parts and seals.
Cost: $120–$235 | Time: 60-90 minutes
Control board malfunctions, faulty sensors, or wiring issues can cause dryer not heating symptoms. Power surges and age-related degradation are typical triggers.
Cost: $144–$280 | Time: 45-75 minutes
Debris, mineral deposits, or foreign objects can restrict normal operation. This is often preventable with regular maintenance.
Cost: $120–$180 | Time: 30-60 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $100–$350 |
| Repair time | 1-2 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
This repair involves electrical components or sealed systems requiring professional tools and certification.
Free diagnostic visit for not heating issues. Same-day appointments available in Sacramento.
Book Free DiagnosticReviewed by Marcus Rivera, Senior Refrigeration & HVAC Technician
Samsung dryer kept shutting off after ten minutes in San Mateo. Technician found the thermal fuse had blown due to a clogged exhaust vent. Replaced the fuse and cleared the vent — works perfectly now.
Whirlpool gas dryer was producing no heat at all in our Hayward apartment. Tech found the gas valve solenoid had failed and replaced it on the first visit. Clothes come out warm and dry in one cycle.
Verified reviews from homeowners across Sacramento Metro
“Washer error code OE kept appearing. Drain pump was failing. Replaced and the washer drains properly now. Quick turnaround.”
Amanda J.
Washing Machine Repair
Sacramento, CA
“Washer error code OE kept appearing. Drain pump was failing. Replaced and the washer drains properly now. Quick turnaround.”
Amanda J.
Washing Machine Repair
Sacramento, CA
“French door fridge was leaking water inside. Drain line was clogged with ice. Tech cleared it and showed me how to prevent it. Great service.”
Daniel G.
Refrigerator Repair
Roseville, CA
“French door fridge was leaking water inside. Drain line was clogged with ice. Tech cleared it and showed me how to prevent it. Great service.”
Daniel G.
Refrigerator Repair
Roseville, CA
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
Jennifer A.
Dryer Repair
Sacramento, CA
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
Jennifer A.
Dryer Repair
Sacramento, CA
“Oven wouldn't heat past 250. Igniter was weak — replaced it and calibrated the thermostat. Baked a cake that evening to test. Perfect.”
Sarah M.
Oven Repair
Sacramento, CA
“Oven wouldn't heat past 250. Igniter was weak — replaced it and calibrated the thermostat. Baked a cake that evening to test. Perfect.”
Sarah M.
Oven Repair
Sacramento, CA
“Dishwasher wouldn't drain. Technician cleaned out the sump filter and replaced the drain valve. Runs quietly again.”
Patricia L.
Dishwasher Repair
Roseville, CA
“Dishwasher wouldn't drain. Technician cleaned out the sump filter and replaced the drain valve. Runs quietly again.”
Patricia L.
Dishwasher Repair
Roseville, CA
“Washer was leaking from the bottom during spin cycle. Tech found a cracked drain pump housing. Replaced same day — no more puddles.”
James T.
Washing Machine Repair
Elk Grove, CA
“Washer was leaking from the bottom during spin cycle. Tech found a cracked drain pump housing. Replaced same day — no more puddles.”
James T.
Washing Machine Repair
Elk Grove, CA