Frigidaire Professional FPBM/FPID Dishwasher

The Professional line shares its internals with the Frigidaire Gallery dishwasher; the premium is in the heavier handle and exterior. That means the same repair economics plus one handle-specific quirk. Here are the covered models, the recurring problems, the codes, the parts, and a repair-or-replace line.

Models covered#

Four variants built from 2016 to 2026 share one platform:

Common problems for this model#

Error codes#

• Error I20 — drain fault
• Error I30 — tap through for the diagnosis
• Error I50 — circulation pump
• Error I60 — tap through for the diagnosis
• Error ER — control fault

For an unlisted code, cut power for 60 seconds and restore it before assuming a hardware failure.

Wear parts#

Verify the part number against your exact model before ordering:

Recall status#

There are no active recalls on the Frigidaire Professional FPBM/FPID series as of 2026-05-28. Check your model against the Consumer Product Safety Commission list at cpsc.gov periodically.

Repair or replace?#

Because the internals match the mid-range Gallery, repairs are cost-effective. The rule: under 10 years old with a fix below 50% of a comparable new dishwasher, repair. After 10 years, tally recent costs — once repairs over the last 2-3 years exceed 40% of replacement, a new unit with warranty is the better value.

Maintenance that prevents failures#

The one Professional-specific chore is the handle: its heavier build vibrates loose faster, so tighten the mounting bolts once a year. Otherwise follow standard Gallery care — clean the filter assembly every couple of weeks, run an empty hot cycle with dishwasher cleaner monthly, and run the sanitize cycle weekly if you wash baby bottles or medical items. Check the tub weld seams each year for any sign of moisture, and scrape rather than pre-rinse so the soil sensor can read the load.

FAQ#

What are the most common Frigidaire Professional problems?#

The top two are the I20 drain error and the PowerPlus wash motor running hot, together roughly 39% of service calls. Others include the handle bolts loosening and the I50 circulation pump failing; watch for I20, I30, or I50 on the display, each flagging a specific part.

Is the Professional model really different from the Gallery?#

Mechanically, no — they share the same internals, so repair parts and economics are identical. The difference is the premium handle and exterior finish, which is also the source of the handle-bolt-loosening quirk.

How long should this dishwasher last?#

With regular filter cleaning and an annual handle-bolt check, expect about 10-13 years. The most frequent failure, the I20 drain fault, is a known, repairable issue rather than a sign the machine is worn out.

Book a Frigidaire Professional repair#

We service Frigidaire dishwashers across Sacramento and the Bay Area, and our techs stock the common FPBM/FPID parts, so most repairs finish in a single visit. Book your repair for same-day or next-day service, upfront pricing, and a 90-day parts-and-labor warranty.