Want a regional phone & address? Pick your area.
Samsung·Dryermedium severity
Samsung Dryer Error Code bE
Button stuck error
Common Causes
- 1Stuck button
- 2Panel issue
Step-by-Step Troubleshooting
- 1
Unplug the dryer and press every button on the control panel one at a time. Feel for any button that does not spring back — it may be stuck from lint or residue behind the panel
- 2
Clean the control panel with a slightly damp cloth. Avoid spraying liquid directly on the panel — moisture can seep behind the membrane and cause more issues
- 3
If no button feels physically stuck, unplug for 15 minutes to fully discharge the control board capacitors. Electrical noise can cause phantom button-press detection
- 4
If the error persists after cleaning and power cycling, the control panel touchpad membrane or the main control board needs replacement
Pro Diagnostic Tip
Samsung dryer bE/6E codes in humid laundry rooms are often caused by condensation on the control panel membrane. If the code only appears in the morning and clears later, humidity is the culprit. A small fan directed at the control panel area helps.
You Might Also Notice
- •Dryer starts running on its own
- •Wrong cycle selected despite pressing the correct button
- •Error appears at power-on before any button is pressed
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$100–$275
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Control panel/touchpad assembly (model-specific)Main control board (Samsung DC92-01606A or model-specific)
Do You Have the Right Tools?
Gas leak detector ($130), thermal fuse tester ($95), belt tension gauge, and vent inspection camera ($180). Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Power off and press each button individually
This repair requires gas leak detectors, thermal fuse testers, and high-voltage multimeters. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Gas dryers carry carbon monoxide and explosion risk. Even electric dryers involve 240V circuits that can deliver a fatal shock. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code bE disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Samsung error code bE mean?
Samsung error code bE indicates: Button stuck error. This is a medium-severity issue affecting your dryer.
How do I fix Samsung error code bE?
Unplug the dryer and press every button on the control panel one at a time. Feel for any button that does not spring back — it may be stuck from lint or residue behind the panel Then, Clean the control panel with a slightly damp cloth. Avoid spraying liquid directly on the panel — moisture can seep behind the membrane and cause more issues Then, If no button feels physically stuck, unplug for 15 minutes to fully discharge the control board capacitors. Electrical noise can cause phantom button-press detection There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my dryer has error bE?
Besides the error code on the display, common signs include: Dryer starts running on its own; Wrong cycle selected despite pressing the correct button; Error appears at power-on before any button is pressed. If you notice any of these symptoms, check your dryer's display panel for error code bE.
How much does it cost to fix Samsung bE?
Repair costs for Samsung bE typically range from $100 to $275 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.