KitchenAid KFGD500 Gas Double Oven Range Guide

This guide pulls the KFGD500 (Gas Double Oven Range) platform into one place: the models that share it, the parts that wear out, the codes it throws, its recall standing, and a plain repair-or-replace call based on the unit's age. The aim is a fast, honest read: what fails, what it costs you in downtime, and whether a fix is still the smart move.

KFGD500 (Gas Double Oven Range) at a glance#

KFGD500ESS, KFGC500JMH, KFGC506JPA, KFGD500EBS all sit on the KFGD500 (Gas Double Oven Range) chassis; a fix proven on one applies to the rest.

Common problems on the KFGD500 (Gas Double Oven Range)#

These are the faults that account for the bulk of KFGD500 (Gas Double Oven Range) service calls:

Lower oven igniter weakening. In the field: glows but does not reach gas valve open amperage. It accounts for roughly 20% of KFGD500 (Gas Double Oven Range) service calls. It is worth ruling out early, before it drags other components down.

Upper oven bake element burnout. Symptom: smaller element has shorter lifespan. On the KFGD500 (Gas Double Oven Range) it lands at about 14% of repair visits. Catch it early and the repair usually stays contained.

F2E0 temperature sensor failure. The tell — one oven overheats or will not heat. Expect it in near 12% of the repairs logged on this platform, and the first check belongs on the f2e0 temperature sensor. A clean diagnosis here avoids a bigger teardown.

Surface burner spark module clicking continuously after spill-over. It accounts for roughly 10% of KFGD500 (Gas Double Oven Range) service calls. It is worth ruling out early, before it drags other components down.

SatinGlide rack roller binding under heavy load. On the KFGD500 (Gas Double Oven Range) it lands at about 8% of repair visits, and the satinglide rack roller is the component to check first. It is easier to resolve before the fault spreads.

Error codes to know#

Panel codes on the KFGD500 (Gas Double Oven Range) and where to read the full walkthrough:

• Error F2E0 — full diagnosis and fix
• Error F3E0 — full diagnosis and fix
• Error F5E1 — full diagnosis and fix
• Error F6E0 — full diagnosis and fix

A code that is not listed often clears with a 60-second power cut at the breaker; if it returns, it needs a real diagnosis.

Parts that fail most#

The KFGD500 (Gas Double Oven Range) wear parts, with the numbers to order:

Recall status#

No active recalls stand against the KFGD500 (Gas Double Oven Range) as of 2026-05-28. Recalls can post at any time, so check cpsc.gov by model number and sign up for alerts.

Repair or replace?#

The KFGD500 (Gas Double Oven Range) math is simple: under 10 years old and a repair below 50% of a new one, fix it. Over 10 years, if your cumulative repairs across the past two-to-three years top 40% of replacement cost, replacing wins on both cost and a fresh warranty.

Maintenance that heads off these failures#

Stay ahead of the common KFGD500 (Gas Double Oven Range) faults with this short routine:

• Clean igniter area monthly on both ovens
• Use manual cleaning on upper oven — smaller cavity handles self-clean less well
• Calibrate both oven temperatures annually
• Clean continuous grates with warm soapy water, never in dishwasher

Getting the most life out of your KFGD500 (Gas Double Oven Range)#

Ranges and ovens are among the longest-lasting appliances in your home, typically serving 15-20 years with basic maintenance. Use the self-clean cycle sparingly (2-3 times per year maximum) — the extreme temperatures stress the door lock mechanism and can crack the door glass. For gas models, the igniter is a wear item that weakens over time — if your oven takes longer than 60 seconds to light, schedule a replacement before it fails completely.

Related guides#

• Kitchenaid Oven Not Heating
• Kitchenaid Oven Temperature Not Right
• Kitchenaid Oven Noisy

When you would rather hand it off, book a KFGD500 (Gas Double Oven Range) oven repair: upfront pricing before any work and a 90-day warranty on parts and labor.