Kitchenaid Oven Error Codes — Complete Error Code Diagnosis Guide

Nine KitchenAid oven codes are decoded here. F1E0 is an EEPROM read or write failure on the electronic oven control, which is the board losing its own stored settings rather than misreading the cavity. F2E0 is a shorted touchpad, worn through or infiltrated by grease, and F2E1 is the ribbon between that panel and the control — unseated, oxidised, or creased at the tail. F3E0 and F3E2 are the RTD probe open and shorted. F5E1, F5E2 and F9E0 are the self-clean latch: refusing to lock, refusing to unlock, and stalling mid-travel.

The second digit is what makes this set worth reading precisely, because it separates two failures of one component into two different repairs. On the touchpad that difference is decisive: an oxidised ribbon costs a reseat, a worn membrane costs an overlay. On the probe it decides whether the fault is a broken conductor or melted insulation shorting to metal, and each is confirmed with a meter at the rear connector rather than by fitting a new part and hoping. The latch trio is judged by where in its travel the mechanism stops.

F6E0 is where a gas model draws the line. The code sits on the ignition and safety-valve circuit, and a weak igniter that no longer draws enough current can leave the valve opening onto nothing — a gas condition, not a nuisance. Igniters, safety valves and their wiring stay professional work. A latch stuck after a clean cycle is a patience problem rather than a force problem. EasyBear services KitchenAid ovens and ranges across Sacramento and the Bay Area.