Maytag Dishwasher Error Codes — Complete Error Code Diagnosis Guide

Ten Maytag dishwasher codes are decoded here, and the fill sequence alone accounts for three of them. F6E1 is no water detected at all, F8E1 is a tub that never reaches level, and F6E4 is the flow meter losing its pulse signal — a stalled turbine, scale binding the paddle wheel, or a broken lead back to the control. Draining takes F8E4 and F9E1, one at the pump and one at the path. F1E1 is leak detection, F7E1 a circulation pump not turning, F3E1 the sump temperature sensor, F5E1 the door interlock, and F2E2 a console reading a held key.

Three fill codes exist because they fail at different points, and the guides use that to keep a reader out of the parts catalogue: no water at all points at a closed supply stop or a fully clogged screen, a tub that fills but never reaches level points at a part-closed valve or a float stuck up, and a lost flow signal points at the meter regardless of how much water arrives. The drain pair splits the same way — cup filter and impeller against a crimped hose or an unpunched disposer knockout.

F1E1 is where the reading stops and the water gets turned off, because the base pan has already collected what a tub gasket or pump seal is letting go. F7E1 carries the sharp hazard: an impeller jammed against its volute often means glass in the sump, so gloves first. This is line voltage in a wet cabinet, which makes the breaker the opening move on any of the ten. EasyBear services Maytag dishwashers across Sacramento and the Bay Area.