Want a regional phone & address? Pick your area.
Frigidaire·Washerhigh severity
Frigidaire Washer Error Code E57
Inverter high current fault
Common Causes
- 1Drive motor shorted, spiking the current draw
- 2Blown output transistors in the inverter stage
- 3A brick-heavy overload dragging the current over the trip point
If a burning smell accompanies E57, unplug immediately — continued operation risks fire from overheated motor windings.
Step-by-Step Troubleshooting
- 1
This is an over-current trip on the drive electronics, so the first free test is to pull half the wash out and retry — a rug or a soaked comforter alone can spike the draw enough to trip a healthy machine
- 2
If a light load still faults, kill power and ohm the motor windings; a phase collapsed toward zero is a shorted motor pulling the excess current
- 3
Open the inverter and look for the scorched output devices and domed capacitors that mark a blown drive stage
- 4
With the motor proven good, the fault is the inverter power transistors and the drive board is the part — but never fit one while the motor still reads shorted
Pro Diagnostic Tip
Let your nose split the diagnosis: E57 with a burnt-winding stink is the motor shorted, while E57 with no smell is usually the inverter output stage letting go on its own. Either way ohm the motor before buying a drive board, because a shorted motor will take the new inverter straight down with it.
You Might Also Notice
- •A scorched-insulation smell mid-cycle
- •Motor dead, refusing to turn
- •The house breaker tripping when it tries to spin
Parts, Cost & Difficulty
Repair Difficulty
Professional OnlyEstimated Repair Cost
$250–$475
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
134743500 inverter/motor control board137326000 drive motor
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code E57 is a high-severity issue that can cause further damage to your washer if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Frigidaire error code E57 mean?
Frigidaire error code E57 indicates: Inverter high current fault. This is a high-severity issue affecting your washer.
How do I fix Frigidaire error code E57?
This is an over-current trip on the drive electronics, so the first free test is to pull half the wash out and retry — a rug or a soaked comforter alone can spike the draw enough to trip a healthy machine Then, If a light load still faults, kill power and ohm the motor windings; a phase collapsed toward zero is a shorted motor pulling the excess current Then, Open the inverter and look for the scorched output devices and domed capacitors that mark a blown drive stage There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error E57?
Besides the error code on the display, common signs include: A scorched-insulation smell mid-cycle; Motor dead, refusing to turn; The house breaker tripping when it tries to spin. If you notice any of these symptoms, check your washer's display panel for error code E57.
How much does it cost to fix Frigidaire E57?
Repair costs for Frigidaire E57 typically range from $250 to $475 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online