Kenmore 41/22 Series (Whirlpool-made) Washer Guide

<strong>Quick answer:</strong> The Kenmore 41/22 Series (Whirlpool-made) Washer Guide is a well-documented washer with known repair patterns. Most common issue: Agitator dogs stripping. Dealing with a Kenmore 41/22 Series (Whirlpool-made) washer that is not working right? You are in the right place. We have compiled service data across every model in this series — top failures and their frequency, error code lookup, parts sourcing, <a href="https://www.cpsc.gov/Recalls" rel="nofollow noopener" target="_blank">recall</a> checks, and an honest repair-vs-replace framework tied to unit age.

Models Covered in This Guide#

This guide covers the Kenmore 41/22 Series (Whirlpool-made) series washers, manufactured from 2015-2022. The following model numbers share the same platform, parts catalog, and common failure modes:

• 110.41162
• 110.41163
• 110.22352
• 110.22242

All models listed above use the same core components and are serviced with the same replacement parts. If your specific model number starts with the same prefix but is not listed, this guide still applies — Kenmore uses common platforms across model variants within a series.

Quick Specifications#

Top 5 Most Common Problems#

Based on repair data for Kenmore 41/22 Series (Whirlpool-made) washers, these are the most frequent issues ranked by how often we see them in service calls. Understanding these common failures helps you identify problems early and make informed repair decisions.

1. Agitator dogs stripping (25% of repairs)#

Agitator dogs stripping — agitator free-spins in both directions

Frequency: This issue accounts for approximately 25% of all service calls on the Kenmore 41/22 Series (Whirlpool-made) series.

2. Motor coupling breaking (18% of repairs)#

Motor coupling breaking — motor hums but tub does not move

Frequency: This issue accounts for approximately 18% of all service calls on the Kenmore 41/22 Series (Whirlpool-made) series.

3. Lid switch failure (14% of repairs)#

Lid switch failure — washer will not start or stops during spin

Frequency: This issue accounts for approximately 14% of all service calls on the Kenmore 41/22 Series (Whirlpool-made) series.

4. Water pump impeller clogging (12% of repairs)#

Water pump impeller clogging — slow or no drain

Frequency: This issue accounts for approximately 12% of all service calls on the Kenmore 41/22 Series (Whirlpool-made) series.

5. Water inlet valve solenoid failure (8% of repairs)#

Water inlet valve solenoid failure — no fill or wrong temperature water

Frequency: This issue accounts for approximately 8% of all service calls on the Kenmore 41/22 Series (Whirlpool-made) series.

Which Parts Commonly Fail?#

These are the parts most frequently replaced on Kenmore 41/22 Series (Whirlpool-made) washers. Part numbers are specific to this series — when ordering, always verify the part number against your exact model number, as there may be minor variations between production years.

Part costs vary by model and supplier. Professional installation adds additional labor cost depending on the complexity of the repair and your location.

Recall Status#

There are no active recalls on the Kenmore 41/22 Series (Whirlpool-made) series as of 2026-05-28. We recommend checking the Consumer Product Safety Commission at cpsc.gov periodically with your specific model number, as recalls can be issued at any time. You can also sign up for email alerts on the CPSC website to be notified if a recall is issued for your appliance.

Repair vs. Replace: When Is It Worth Fixing Your Kenmore 41/22 Series (Whirlpool-made)?#

This is the most common question we hear from Kenmore 41/22 Series (Whirlpool-made) owners. The answer depends on three factors: the age of the unit, the cost of the repair, and the cumulative repair history.

These budget washers have the cheapest parts in the industry. Agitator dogs cost . Motor coupling . Nearly every repair is cost-justified.

General rule for the Kenmore 41/22 Series (Whirlpool-made): If the unit is under 10 years old and the repair costs less than 50% of a new equivalent model, repair is almost always the better value. After 10 years, evaluate the total repair history — if cumulative repairs over the past 2-3 years exceed 40% of replacement cost, upgrading to a new unit provides better long-term value and a fresh warranty.

Repair Decision Matrix by Age#

| Unit Age | Minor Repair | Major Repair | Critical Repair | |---|---|---|<p>Our technicians' field observations align with this conclusion — dealing with a kenmore 41/22 series (whirlpool-made) washer that is not working right?.</p>

---| | Under 5 years | Repair | Repair | Repair (usually) | | 5-10 years | Repair | Evaluate total history | Consider replacing | | Over 10 years | Repair if otherwise healthy | Consider replacing | Replace recommended |

Preventive Maintenance for Kenmore 41/22 Series (Whirlpool-made)#

Regular maintenance is the most cost-effective way to extend the life of your Kenmore 41/22 Series (Whirlpool-made) washer and prevent the common failures listed above. Follow these practices:

1. Check pockets before loading — coins destroy the water pump
2. Do not overload — stress on the motor coupling causes premature failure
3. Leave lid open between loads to air out the tub
4. Replace agitator dogs when you notice the agitator spinning freely — fix prevents bigger damage

Related Troubleshooting Guides#

If your Kenmore 41/22 Series (Whirlpool-made) is experiencing a specific symptom, these detailed guides walk you through the diagnosis process step by step:

• Kenmore Washer Not Spinning
• Kenmore Washer Not Draining
• Kenmore Washer Will Not Start
• Kenmore Washer Noisy

What Are the Best Long-Term Ownership Tips?#

To extend the life of your washing machine, avoid overloading (follow the manufacturer's load size guide), always use HE detergent in the recommended amount, and run a cleaning cycle monthly. For front-load washers, leave the door ajar between loads to prevent mold growth on the door gasket. For top-load washers, distribute clothes evenly before starting the spin cycle. Check pockets before every load — coins, keys, and small items entering the drain pump are the single most common cause of washer failure.

Need Professional Help With Your Kenmore 41/22 Series (Whirlpool-made)?#

We've repaired thousands of Kenmore 41/22 Series (Whirlpool-made) washers across Sacramento and the Bay Area. Our technicians carry the most common Kenmore replacement parts on every service call, which means most repairs are diagnosed and completed in a single visit — no waiting for parts to arrive.

Book your Kenmore 41/22 Series (Whirlpool-made) repair today at /book — same-day and next-day appointments available. We provide upfront pricing before any work begins, and all repairs include a 90-day parts and labor warranty.