Amana Gas Stove Clicking Won't Stop: Causes & Fix

Most Likely Cause#

The number-one cause of continuous clicking on an Amana gas stove is moisture on the igniter electrode — water from a boil-over, a spill, or aggressive cleaning that shorts the spark and triggers it over and over. Dry the burner area thoroughly, using a fan or a hair dryer on a cool setting, and the clicking usually stops. If it persists after drying, a stuck igniter switch under the knob or a faulty spark module is next.

Continuous clicking is the spark system firing when it should not. Because moisture and debris are by far the most common triggers, and both are free to fix, it is worth ruling them out before touching a component.

Why an Amana Gas Stove Keeps Clicking#

How the Spark Ignition System Works#

Each burner knob has a small micro-switch that tells the spark module to fire the igniter electrode when you turn it to the light position. The module distributes high voltage to the electrodes, and a spark jumps the gap to light the gas. Anything that completes that circuit when it should not — water bridging the electrode, conductive grease and food residue, a switch stuck in the on position, or a shorted module or wire — makes the spark fire continuously. That is why the clicking can start right after cooking or cleaning: liquid or debris around the electrode is the usual bridge. Removing the bridge stops the spark.

Check It Yourself First#

Unplug the stove or turn off the breaker to stop the clicking while you work.

1. Dry the burner area. Remove the burner cap and grate, blot up any visible moisture, and let the area dry completely — a fan across the burner speeds it. Avoid spraying water near the electrodes.
2. Clean around the electrode. Use a dry cloth or an old toothbrush to clear grease and carbonized food from around the igniter base, removing anything bridging the gap between the electrode and the burner.
3. Free a stuck switch. Rapidly click the affected knob on and off several times; a switch stuck from grease or wear may release. If one burner clicks regardless of knob position, its switch is the suspect.
4. Isolate the pattern. Clicking on one burner points to that electrode or switch; clicking on all burners at once points to the spark module.
5. Inspect the wiring. Look for frayed or melted wires between the module and electrodes, or wires touching metal — a shorted wire triggers continuous sparking.

Repair or Replace?#

Drying and cleaning cost nothing and fix most cases. A stuck switch, a spark module, or damaged wiring is a moderate repair — worth doing on a sound range. Get a quote before a module replacement, but continuous clicking rarely justifies a new stove; you can light burners manually in the meantime.

When to Call a Pro#

Call for service if drying and cleaning do not stop the clicking, if the spark module or wiring is at fault, or if you see damaged wires near the burners. Spark-module and wiring repairs are best handled by a technician.

Amana gas stove clicking that won't quit? Book an EasyBear technician — we diagnose igniter switches, spark modules, and wiring on gas ranges.