How much does a oven broil element replacement cost?#
Replacing the broil element on the unit runs $105–$210 ($158 is the usual figure). The broil element is what handles holding an even bake-and-broil temperature. When it fails, a bake that never quite reaches temperature is usually the first clue, and on a oven that is not a fault you can safely ignore for long. Where a given quote lands depends on part quality, access difficulty, and how much diagnostic time the fault demands. Most of the bill is diagnosis and access — the element itself is one of the cheaper parts in the machine. Against $650–$3,000 for a new oven, that keeps a repair the cheaper move on a unit that is otherwise sound.
Oven broil element replacement cost
- What it does: the broil element heats the oven from the top for broiling.
- Signs it is failing: no broil heat or a partially glowing element.
- The repair job: replacing the broil element and checking the connections.
- DIY or pro: a common DIY repair.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $105 |
| Typical repair | $158 |
| Premium part or hard access | $210 |
| A new oven, installed | $650–$3,000 |
Against a new oven at $650–$3,000 installed, a broil element repair at $105–$210 is usually the cheaper fix — unless the oven is already old or has other faults.
Pro note: a partial glow points at a cracked element, which a tech confirms before ruling out the control relay.
Is replacing the broil element on a oven worth it?#
Replacing the broil element pays off whenever the oven is otherwise sound: $105–$210 beats the $650 to $3,000 of buying new, and it spares you delivery and haul-away on top. With dinner and holiday cooking on hold, most owners would rather fix a Wolf- or Thermador-tier unit than replace it; if instead it is past roughly 10 years and carrying other faults, put the money toward a replacement — a single fix rarely rescues a tired machine.
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Oven Broil element replacement cost: FAQ#
How much does a oven broil element replacement cost?#
Most jobs run $105 to $210, with $158 the common figure once parts and labor are counted.
Is replacing the broil element on a oven worth it?#
Yes on a sound or higher-end oven: $105–$210 stays well below $650–$3,000. Once the machine is near the end of its life, buying new is the better spend.
What makes the broil element fail on a oven?#
The broil element usually gives out from ordinary burnout after years of thermal cycling, mineral scale, or a hairline break in the coil.
Can I replace a oven broil element myself?#
No — it means opening the sealed refrigerant system, which by law needs certified recovery equipment, so it is strictly a professional repair.
How long does a oven broil element replacement take?#
Expect a half-day. Recovering the old refrigerant, fitting the new part, evacuating the system, and recharging it all take time and cannot be rushed.
Senior Gas Appliance Specialist · 18 years experience
AGA-certified gas appliance specialist with 18 years of experience in residential and commercial oven, range, and cooktop repairs.
