Ge Dishwasher Model Guides — Complete Models Guide

Eight GE dishwasher guides, and the model prefixes carry the plan. GDF machines are front-control, GDT machines are top-control, the GDP630 sits between them, and the Profile PDT715 is the premium end. Within that, 535, 630, 665, 695 and 715 climb through wash systems and rack hardware. The prefix tells you where the console and its ribbon connector live, and a control fault depends on that before anything else.

Each page covers how that model behaves when it faults and the order to check it in: the drain path and air gap, the wash motor, the thermistor reading at the sump, the door latch the control waits on before it will start. Many of these models share hardware across the GDF and GDT lines, so the pages state plainly which repair carries over between them and which one stops at the console.

No gas, no refrigerant. The electrical hazard is the junction box under the toe kick and the door harness that flexes every time the door opens. Kill the circuit at the panel rather than relying on the door switch, and treat a control that only misbehaves while the door is moving as a wiring question before it is a board question. EasyBear repairs GE dishwashers across Sacramento and the Bay Area.