F1-E on a used range
Maytag's list says F1-E may point to a problem with the oven control or the associated wiring. On a second-hand range the code may come from wear, from the move, or from a fault the previous owner already knew about. If you are considering a used range, ask to see it powered and heating; a code at that stage is a reason to negotiate or walk away. If you already own it, restart once from the breaker, and if F1-E returns, have the control and wiring checked before relying on it.
Error codes
Reference| Code | Meaning |
|---|---|
| F1-E | There may be a problem with the Oven Control, or the associated wiring. |
F1-E on a range you have just acquired
- The code at first power-up — The fault may predate the sale, or come from transport. Note whether it showed before you had set any function.
- The code after a test bake — The control fails once heat builds.
- Missing screws or panels — A range with missing fixings may have been opened before. Ask the seller whether anyone has worked on it.
- Signs of earlier repairs — Mismatched parts or loose fixings.
- An unknown history — No receipts and no service records. The model and serial numbers can at least tell a technician its age.
Ranked causes of F1-E on a used range
- Connectors loosened in transport — First: moving a range can shake connections loose. Ranges carried on their backs or bumped on stairs are the most likely to suffer.
- An ageing control — Second: boards wear with years of heat cycles. A range several years old may simply be reaching the end of the board's life.
- Damaged wiring — Third: from earlier repairs, pests or heat.
- A poor connection at the new home — Fourth: an unsuitable or worn cord or supply connection.
Checks for a used range
- Check the connection — Have the cord and supply connection fitted correctly, ideally by a professional.
- Reset once — Use the breaker to cut and restore power.
- Run a test bake — Use a thermometer to check the temperature. Compare the thermometer reading with the set temperature after the oven has settled.
- Look over the range — Missing screws, loose panels, scorch marks.
- Ask the seller — About the oven's age, repairs and any codes seen.
Owner steps for F1-E
- Restart from the breaker — Restore power after a short pause.
About 5 min
- Run a test bake — Check that the oven heats and the code stays away.
Tools: oven thermometerAbout 20 min
- Inspect the outside — Look for missing fixings or signs of past repairs.
Tools: flashlightAbout 10 min
- Gather what you know — Model, serial, age and anything the seller said.
Tools: notepadAbout 10 min
- Book a check — Ask for an inspection of the control and the wiring. A professional can also confirm the supply connection is correct.
Tools: ::
Safety with a second-hand range
Have a used electric range connected by someone qualified, with a cord and connection that suit the supply in your home; an unsuitable connection is a fire risk. Do not open the console or the rear panel to look inside. If the range smells of burning on first use, beyond the brief smell of residue burning off, switch it off at the breaker.
When F1-E needs a professional
Call if F1-E returns after a restart, or before relying on a used range that showed the code at all. A professional checks the supply connection, reseats or replaces connectors, and tests the control. On an inexpensive range, ask whether the repair is worth it. If you bought the range from a dealer, check whether it came with any short warranty before paying for repairs.
Ovens this page covers
This page covers Maytag ovens and ranges with an electronic control that list F1-E, including those bought second-hand. It does not cover microwaves, cooktops or other brands. No model-specific F1-E page exists yet.

