Want a regional phone & address? Pick your area.
Kenmore·Washermedium severity
Kenmore Washer Error Code F8E6
Depending on the model, the F8E6 could have two different meaning; below are the two possible explainations:
Common Causes
- 1This code indicates that the cold water hose is connected to the hot water inlet, and the hot water hose is connected to the cold water inlet.
Step-by-Step Troubleshooting
- 1
Close the lid to resume the cycle
- 2
Ensure the Hot and Cold water valves are fully open; both hot and cold inlet hoses must be connected for the washer to operate correctly.
- 3
If your washer is plugged into an outlet, simply unplug the unit for 5 minutes and then plug the unit back in.
Parts, Cost & Difficulty
Parts That May Need Replacement
inlet hosewater valvecontrol panel
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Close the lid to resume the cycle
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F8E6 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Kenmore error code F8E6 mean?
Kenmore error code F8E6 indicates: Depending on the model, the F8E6 could have two different meaning; below are the two possible explainations:. This is a medium-severity issue affecting your washer.
How do I fix Kenmore error code F8E6?
Close the lid to resume the cycle Then, Ensure the Hot and Cold water valves are fully open; both hot and cold inlet hoses must be connected for the washer to operate correctly. Then, If your washer is plugged into an outlet, simply unplug the unit for 5 minutes and then plug the unit back in. If these steps don't resolve the error, contact a professional.
How much does it cost to fix Kenmore F8E6?
Repair costs for Kenmore F8E6 typically range from $100 to $500 depending on the specific cause. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online