Want a regional phone & address? Pick your area.
Kenmore·Washermedium severity
Kenmore Washer Error Code F22
Door lock fault
Common Causes
- 1Door lock assembly failed
- 2Door not pulled fully shut
- 3Strike or hinge sagged out of alignment
- 4Lock harness wire broken
Step-by-Step Troubleshooting
- 1
Push the front-load door firmly until the latch clicks, since a door only leaned shut never lets the lock engage
- 2
Inspect the strike on the door and the catch in the lock for a cracked tab that stops the latch seating
- 3
Check the hinge for sag that drops the strike below the lock opening and shim or adjust the door
- 4
Unplug the door lock and read its coil for continuity, treating an open coil as a failed lock
Pro Diagnostic Tip
F22 shows on the 110.4-series front-load Kenmore, a Whirlpool Duet build, when the door lock fails to confirm within its time window. The lock is a common wear item on this platform, so replace the complete assembly rather than the strike alone if the machine hums but never fills or spins.
You Might Also Notice
- •The door-locked light blinks and the cycle stalls
- •The washer will not fill or spin
- •No lock click is heard at the start
- •The door feels loose when shut
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$110–$260
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Door lock assemblyDoor strike
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F22 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Kenmore error code F22 mean?
Kenmore error code F22 indicates: Door lock fault. This is a medium-severity issue affecting your washer.
How do I fix Kenmore error code F22?
Push the front-load door firmly until the latch clicks, since a door only leaned shut never lets the lock engage Then, Inspect the strike on the door and the catch in the lock for a cracked tab that stops the latch seating Then, Check the hinge for sag that drops the strike below the lock opening and shim or adjust the door There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error F22?
Besides the error code on the display, common signs include: The door-locked light blinks and the cycle stalls; The washer will not fill or spin; No lock click is heard at the start. If you notice any of these symptoms, check your washer's display panel for error code F22.
How much does it cost to fix Kenmore F22?
Repair costs for Kenmore F22 typically range from $110 to $260 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online