Want a regional phone & address? Pick your area.
Frigidaire·Refrigeratormedium severity
Frigidaire Refrigerator Error Code OP
Freezer over-temperature condition
Common Causes
- 1Door was left open
- 2Power outage occurred
- 3Compressor cycling issue
Step-by-Step Troubleshooting
- 1
Verify doors are fully closed and gaskets seal properly
- 2
Check if a power outage occurred recently — reset may be needed
- 3
Allow 24 hours for temperatures to stabilize after an event
- 4
If OP persists after 24 hours, check compressor operation — listen for cycling
Pro Diagnostic Tip
OP is a temperature alert that should clear on its own once conditions normalize. If it persists longer than 24 hours, a compressor or sealed system issue is likely.
You Might Also Notice
- •Freezer contents partially thawed
- •Temperature display flashing
- •Compressor runs but freezer stays warm
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$0–$150
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
241872502 door gasket (if seal is compromised)
Do You Have the Right Tools?
Refrigerant gauges ($200+), vacuum pump ($250), leak detector ($150), and EPA-certified recovery equipment. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Close door firmly and wait 24 hours
This repair requires specialized refrigerant handling equipment, EPA certification, and precise temperature diagnostics. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Refrigerant (R-134a/R-600a) requires EPA certification to handle. Improper discharge is a federal violation and health hazard. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code OP disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Frigidaire error code OP mean?
Frigidaire error code OP indicates: Freezer over-temperature condition. This is a medium-severity issue affecting your refrigerator.
How do I fix Frigidaire error code OP?
Verify doors are fully closed and gaskets seal properly Then, Check if a power outage occurred recently — reset may be needed Then, Allow 24 hours for temperatures to stabilize after an event There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my refrigerator has error OP?
Besides the error code on the display, common signs include: Freezer contents partially thawed; Temperature display flashing; Compressor runs but freezer stays warm. If you notice any of these symptoms, check your refrigerator's display panel for error code OP.
How much does it cost to fix Frigidaire OP?
Repair costs for Frigidaire OP typically range from $0 to $150 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.