How much does a washer dryer combo shock absorbers replacement cost?#
Replacing the shock absorbers in a washer dryer combo typically runs $130 to $250, and a routine job lands around $190. The spread reflects the grade of part you pick and how buried the dampers sits — a LG or Bosch commands more for the same component than a builder-grade model. Much of the price is the reach — some designs surrender the shocks in minutes, others demand the unit come most of the way apart first. The work is routine for a pro: isolate the fault, fit the shock absorbers, and confirm the unit runs clean before packing up, which is why a firm quote is easy to give up front. The table under this answer lays out the part-plus-labor math behind that figure. Set against the $1,000 to $2,500 a new washer dryer combo costs to buy and install, restoring the shock absorbers is the economical move on any machine with good years left in it.
Washer Dryer Combo shock absorbers replacement cost
- What it does: the shock absorbers damp the tub so it does not slam around.
- Signs it is failing: violent shaking or banging on the spin.
- The repair job: replacing the dampers as a set and checking the springs.
- DIY or pro: a moderate DIY job.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $130 |
| Typical repair | $190 |
| Premium part or hard access | $250 |
| A new washer dryer combo, installed | $1,000–$2,500 |
Against a new washer dryer combo at $1,000–$2,500 installed, a shock absorbers repair at $130–$250 is usually the cheaper fix — unless the washer dryer combo is already old or has other faults.
Pro note: a tech renews the dampers as a set and checks the suspension springs, since one tired damper throws the whole tub off balance.
Is replacing the shock absorbers on a washer dryer combo worth it?#
If the combo is newer, the answer is an easy yes: the $130 to $250 outlay is far below the $1,000 to $2,500 a fresh washer dryer combo would cost, and the repair leaves the rest of the machine untouched. The judgment call is an aging machine with other symptoms brewing; there, a near-$250 repair on the shocks is money many owners would rather redirect to a new one. A useful test: if the shock absorbers is the only fault on an otherwise solid unit, fix it; if the machine is old and the repairs are piling up, price out a replacement first. Either way, a licensed EasyBear pro pins the fault and quotes the shock absorbers before any part is ordered, so you never pay to guess.
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Washer Dryer Combo Shock absorbers replacement cost: FAQ#
How much does a washer dryer combo shock absorbers replacement cost?#
A washer dryer combo shock absorbers replacement generally runs $130–$250, and about $190 on a routine job. Part grade, brand, and how hard the dampers is to reach are what set where you land.
Is replacing the shock absorbers worth it, or should I just buy new?#
Usually worth it on a machine that is not too old — $130 to $250 is minor next to the $1,000 to $2,500 of buying new. Replacement only wins once the unit is aging and other repairs are stacking up behind this one.
What makes the shocks fail?#
Common causes are ordinary wear, heat, and vibration over years of use. The warning signs to watch for are violent shaking or banging on the spin.
Can I replace the shock absorbers myself?#
A confident DIYer can often manage it when the shock absorbers is easy to reach and the diagnosis is solid. If any of that is in doubt, a pro removes the guesswork and warranties the repair.
How long does the job take?#
Plan on about an hour for the swap itself, plus a test cycle afterward to confirm the fault is cleared. A tech who has done it before tends to work at the fast end of that estimate.
Senior Gas Appliance Specialist · 18 years experience
AGA-certified gas appliance specialist with 18 years of experience in residential and commercial oven, range, and cooktop repairs.


