Washer Drain Pump Replacement Cost: Parts & Labor

How much does a washer drain pump replacement cost?#

Budget $125 to $260 to swap the drain pump in a washer, though most jobs settle near $193. The spread reflects the grade of part you pick and how buried the drain pump sits — a Miele or Speed Queen commands more for the same component than a builder-grade model. Two machines with the same fault can quote differently once you factor in how long it takes to expose the pump assembly on the unit. In practice the fix is quick once the fault is confirmed: the old pump comes out, the replacement goes in, and a full test cycle proves the unit is back to normal. Below, the cost breakdown shows what the component and the bench time each contribute to the total. Weighed beside the $500 to $1,500 of buying new, the repair earns its keep unless the washer is already near the end of the road.

Washer drain pump replacement cost

• What it does: the drain pump pushes water out at the end of a cycle.
• Signs it is failing: standing water, a humming pump, or a cycle that stops before draining.
• The repair job: clearing the pump, fitting a new one, and testing a full drain.
• DIY or pro: often owner-fixable if the pump is easy to reach.

Against a new washer at $500–$1,500 installed, a drain pump repair at $125–$260 is usually the cheaper fix — unless the washer is already old or has other faults.

Pro note: before buying a pump, a tech clears the filter and hose — a coin or a sock jamming the impeller looks exactly like a dead pump.

Is replacing the drain pump on a washer worth it?#

For a washer under roughly 10 years old, putting $125 to $260 into the drain pump is money well spent — it recovers a working machine for a sliver of the $500 to $1,500 a replacement runs, and nothing else on the unit is near the end of its life. Age shifts the math. When the pump assembly is the third thing to fail this year, or the unit is well past 10 years, a top-of-range $260 bill is better put toward a replacement than a patch. A useful test: if the pump is the only fault on an otherwise solid unit, fix it; if the machine is old and the repairs are piling up, price out a replacement first. Booking a pro means the pump is diagnosed right the first time and the repair carries a written guarantee, which matters most on a part buried this deep.

Washer Drain pump replacement cost: FAQ#

How much does a washer drain pump replacement cost?#

A washer pump replacement generally runs $125–$260, and about $193 on a routine job. Part grade, brand, and how hard the drain pump is to reach are what set where you land.

Is replacing the pump worth it, or should I just buy new?#

Usually worth it on a machine that is not too old — $125 to $260 is minor next to the $500 to $1,500 of buying new. Replacement only wins once the unit is aging and other repairs are stacking up behind this one.

What makes the pump assembly fail?#

Common causes are worn bearings, an overloaded circuit, and water or lint working into the windings. The warning signs to watch for are standing water, a humming pump, or a cycle that stops before draining.

Can I replace the pump myself?#

A confident DIYer can often manage it when the pump is easy to reach and the diagnosis is solid. If any of that is in doubt, a pro removes the guesswork and warranties the repair.

How long does the job take?#

Plan on about an hour for the swap itself, plus a test cycle afterward to confirm the fault is cleared. A tech who has done it before tends to work at the fast end of that estimate.