How much does a washer dryer combo drain pump replacement cost?#
Replacing the drain pump in a washer dryer combo typically runs $140 to $270, and a routine job lands around $205. Whether the shop fits a factory part or an aftermarket one, and how much bench time it takes to reach the pump, decide if you pay nearer $140 or $270. Much of the price is the reach — some designs surrender the drain pump in minutes, others demand the combo come most of the way apart first. In practice the fix is quick once the fault is confirmed: the old pump assembly comes out, the replacement goes in, and a full test cycle proves the combo is back to normal. Below, the cost breakdown shows what the component and the bench time each contribute to the total. Compared with the $1,000 to $2,500 for a replacement, spending on the pump assembly pays off on all but the most tired units.
Washer Dryer Combo drain pump replacement cost
- What it does: the drain pump pushes water out at the end of a cycle.
- Signs it is failing: standing water, a humming pump, or a cycle that stops before draining.
- The repair job: clearing the pump, fitting a new one, and testing a full drain.
- DIY or pro: often owner-fixable if the pump is easy to reach.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $140 |
| Typical repair | $205 |
| Premium part or hard access | $270 |
| A new washer dryer combo, installed | $1,000–$2,500 |
Against a new washer dryer combo at $1,000–$2,500 installed, a drain pump repair at $140–$270 is usually the cheaper fix — unless the washer dryer combo is already old or has other faults.
Pro note: before buying a pump, a tech clears the filter and hose — a coin or a sock jamming the impeller looks exactly like a dead pump.
Is replacing the drain pump on a washer dryer combo worth it?#
On a reasonably young unit, $140 to $270 to restore the pump beats the $1,000 to $2,500 of buying new without much debate; the fix buys years more use from a machine that is otherwise sound. Age shifts the math. When the drain pump is the third thing to fail this year, or the unit is well past 8 years, a top-of-range $270 bill is better put toward a replacement than a patch. A useful test: if the pump assembly is the only fault on an otherwise solid unit, fix it; if the machine is old and the repairs are piling up, price out a replacement first. Booking a pro means the pump assembly is diagnosed right the first time and the repair carries a written guarantee, which matters most on a part buried this deep.
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Washer Dryer Combo Drain pump replacement cost: FAQ#
How much does a washer dryer combo drain pump replacement cost?#
A washer dryer combo pump assembly replacement generally runs $140–$270, and about $205 on a routine job. Part grade, brand, and how hard the pump is to reach are what set where you land.
Is replacing the pump assembly worth it, or should I just buy new?#
Usually worth it on a machine that is not too old — $140 to $270 is minor next to the $1,000 to $2,500 of buying new. Replacement only wins once the combo is aging and other repairs are stacking up behind this one.
What makes the drain pump fail?#
Common causes are worn bearings, an overloaded circuit, and water or lint working into the windings. The warning signs to watch for are standing water, a humming pump, or a cycle that stops before draining.
Can I replace the pump assembly myself?#
A confident DIYer can often manage it when the pump assembly is easy to reach and the diagnosis is solid. If any of that is in doubt, a pro removes the guesswork and warranties the repair.
How long does the job take?#
Plan on about an hour for the swap itself, plus a test cycle afterward to confirm the fault is cleared. A tech who has done it before tends to work at the fast end of that estimate.


