F0 on a Maytag cooktop
Maytag explains F0 in plain terms: an object, liquids or soils are putting pressure on the control panel. The cooktop reads that pressure as a key being held and refuses to carry on. Look beyond the obvious pan or spill: an elbow resting on the counter edge, a cat stepping across the glass, a child's hands or a bag set down near the controls can all do it. Clear the controls, dry them, and F0 should go. If it stays with nothing on the panel, the control needs a professional.
Error codes
Reference| Code | Meaning |
|---|---|
| F0 | An object, liquids, or soils are putting pressure on the control panel. |
Everyday situations that trigger F0
- Someone leaning on the counter by the controls — Front-mounted touch areas sit right where people rest a hand or a hip.
- A pet on the cooktop — Paws on the glass press keys just as fingers do.
- Shopping or a bag put down nearby — Anything resting on the control area holds a key down.
- A boil-over reaching the touch area — Liquid across the controls reads as pressure.
- Sticky residue from earlier cooking — A dried film can press or bridge keys even when nothing shows from above.
- A toy or a magnet left on the glass — Small objects near the controls are easy to overlook when the cooktop is not in use.
Ranked causes of F0
- An object on the control area — First: utensils, lids, bags or a resting hand are the commonest and the easiest to clear.
- Liquid across the keys — Second: spills and boil-overs act like a finger held down.
- Built-up soil on the panel — Third: dried food or grease over the keys.
- A fault in the control panel — Fourth: when the code stays with the panel clean, dry and clear.
Finding the cause
- Take everything away from the controls — Including items that only overlap the edge of the touch area.
- Think about who was in the kitchen — People leaning, children playing or a pet jumping up all count.
- Dry the panel — A dry cloth over the control area, then a second dry pass.
- Look at the panel from the side — A film shows up at a low angle.
- Watch whether F0 clears — If it does, the cause was on the surface.
Owner steps for F0
- Clear the control area — Lift off anything on or touching it.
About 1 min
- Dry the controls — Use a soft dry cloth.
Tools: microfiber clothAbout 2 min
- Clean any sticky film — A little mild detergent on a damp cloth, then dry thoroughly.
Tools: mild detergentAbout 5 min
- Keep pets off the cooktop — Discourage climbing, and lock the controls if your model has a lock.
Tools: ::
- Stop at the glass — If F0 stays with a clean, clear panel, the control is tested by a professional with the power off.
Tools: ::
Safety with F0
A cooktop that thinks a key is held can behave unexpectedly, so keep pets and children away from the glass, and never leave items on the controls while cooking. Wait for hot glass to cool before cleaning around the panel. If the cooktop heats with nothing selected, turn off its breaker; the electronics beneath the glass can hold a charge, so do not lift or open the cooktop yourself.
When F0 needs a professional
Call if F0 remains once the control area is clean, dry and clear, if it returns with nothing near the panel, or if the cooktop switches zones on by itself. A professional tests the touch control and its connections with the cooktop out of the counter. Mention whether pets or children could have reached the cooktop, so the simple explanations are ruled out quickly.
Cooktops covered by this page
The page covers Maytag electric and induction cooktops with touch controls that list F0. It does not cover Maytag gas cooktops with knobs, ranges or other brands. No model-specific F0 page exists yet; control layouts differ, so check your model's documentation.

