Quick Answer: Resetting a Amana Washer#
An Amana washer runs the Whirlpool control platform, whose board clears only when power is truly removed, so pull the plug or drop the breaker and leave it off two minutes. That discharge window recovers a frozen console or a cycle that stalled after a blip. It will not free a jammed pump or a lid switch that has genuinely failed.
How to Reset a Amana Washer (Step by Step)#
- Pull the Amana plug or drop its breaker — Amana runs on the Whirlpool control platform, and the board clears only when power is truly removed.
- Leave it unplugged for two minutes, the same board-discharge window Whirlpool specifies, before restoring power.
- Most Amana top-loaders are simple dial models with no electronic lock, so the power-cycle is the whole reset; on electronic-console models, hold the Control Lock pad for three seconds to clear a locked panel.
- Restore power, start a short Drain and Spin, and confirm the pump runs and the basket spins up.
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Amana Washer Model Variations#
Dial-timer Amana top-loaders carry no electronic lock, so cutting power is the entire reset with nothing to release. Electronic-console models add a Control Lock pad cleared with a three-second hold. Front-load Amana washers follow the Whirlpool front-load routine, including the door-lock click on restart, and a stubborn fault traces through the Whirlpool code list.
When a Reset Doesn't Fix Your Amana Washer#
If the machine still stalls after the two-minute power-down, the trouble is usually a part rather than the board on this platform. A no-drain points at the pump or a clogged filter, and a no-spin at the lid switch or the drive, so check those before blaming the electronics. Read any surviving fault with our Amana error-code guide, then follow the will-not-start, will-not-drain, and will-not-spin symptom pages.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Need Professional Help?#
If a power-cycle and the checks above do not bring your Amana washer back, book a free diagnostic and an EasyBear technician will take it from there.
Amana Washer Reset FAQ#
How do I reset an Amana washer?
Unplug the washer or drop its breaker and leave it off for two minutes so the Whirlpool-platform board discharges, then restore power. Run a short Drain and Spin to confirm the pump and basket respond.
Who makes Amana washers?
Amana is a Whirlpool-owned brand, so its washers run the Whirlpool control and drive platform. That means Whirlpool parts and the Whirlpool code list apply when you diagnose one.
Does an Amana washer have a control lock?
Only the electronic-console models do, cleared with a three-second hold of the Control Lock pad. Dial-timer top-loaders have no lock, so the power-cycle is the whole reset.
Why does my Amana washer stop mid-cycle?
A mid-cycle stop usually means an unbalanced load, a lid switch dropping contact, or a drain that cannot clear rather than the board. Redistribute the load and check the lid switch before power-cycling again.
How long do I unplug an Amana washer to reset it?
Two minutes, the same discharge window Whirlpool specifies for its boards. A quick flick may not clear the control, so hold the power off the full time.
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
