How much does a dryer igniter replacement cost?#
Budget $100 to $200 to swap the igniter in a dryer, though most jobs settle near $150. Where your quote falls comes down to a few levers: an aftermarket part keeps the ignition element affordable, while an original component, tight access, or a premium Electrolux name pushes it higher. Much of the price is the reach — some designs surrender the igniter in minutes, others demand the unit come most of the way apart first. The work is routine for a pro: isolate the fault, fit the glow bar, and confirm the unit runs clean before packing up, which is why a firm quote is easy to give up front. The breakdown just below separates the part price from the labor so you can see which side of the $100 to $200 spread a given estimate sits on. Compared with the $450 to $1,300 for a replacement, spending on the glow bar pays off on all but the most tired units.
Dryer igniter replacement cost
- What it does: the igniter lights the gas burner.
- Signs it is failing: no heat on a gas unit or a burner that glows but will not light.
- The repair job: replacing the igniter and confirming a clean light-off.
- DIY or pro: a moderate DIY job.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $100 |
| Typical repair | $150 |
| Premium part or hard access | $200 |
| A new dryer, installed | $450–$1,300 |
Against a new dryer at $450–$1,300 installed, a igniter repair at $100–$200 is usually the cheaper fix — unless the dryer is already old or has other faults.
Pro note: a glowing-but-not-lighting igniter is the classic weak-igniter sign a tech looks for before touching the gas valve.
Is replacing the igniter on a dryer worth it?#
On a reasonably young unit, $100 to $200 to restore the ignition element beats the $450 to $1,300 of buying new without much debate; the fix buys years more use from a machine that is otherwise sound. Age shifts the math. When the igniter is the third thing to fail this year, or the unit is well past 10 years, a top-of-range $200 bill is better put toward a replacement than a patch. In short, the repair pays on a healthy unit, and a licensed tech can confirm the glow bar is the real culprit before you spend a dollar on parts. Either way, a licensed EasyBear pro pins the fault and quotes the glow bar before any part is ordered, so you never pay to guess.
Do You Have the Right Tools?
Gas leak detector ($130), thermal fuse tester ($95), belt tension gauge, and vent inspection camera ($180). Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Dryer Igniter replacement cost: FAQ#
How much does a dryer igniter replacement cost?#
A dryer glow bar replacement generally runs $100–$200, and about $150 on a routine job. Part grade, brand, and how hard the ignition element is to reach are what set where you land.
Is replacing the glow bar worth it, or should I just buy new?#
Usually worth it on a machine that is not too old — $100 to $200 is minor next to the $450 to $1,300 of buying new. Replacement only wins once the unit is aging and other repairs are stacking up behind this one.
What makes the igniter fail?#
Common causes are the constant heat-and-cool cycling that eventually cracks the element or burns out its coil. The warning signs to watch for are no heat on a gas unit or a burner that glows but will not light.
Can I replace the glow bar myself?#
A confident DIYer can often manage it when the glow bar is easy to reach and the diagnosis is solid. If any of that is in doubt, a pro removes the guesswork and warranties the repair.
How long does the job take?#
Plan on thirty minutes or so for the swap itself, plus a test cycle afterward to confirm the fault is cleared. A tech who has done it before tends to work at the fast end of that estimate.
Appliance Repair Technician · 11 years experience
Experienced technician with 11 years specializing in Frigidaire and Electrolux refrigerator and dryer repair with a focus on safety.
