Dryer Drum Bearing Replacement Cost

How much does a dryer drum bearing replacement cost?#

Budget $130 to $260 to swap the drum bearing in a dryer, though most jobs settle near $195. The spread reflects the grade of part you pick and how buried the drum bearing sits — a Electrolux or LG commands more for the same component than a builder-grade model. Two machines with the same fault can quote differently once you factor in how long it takes to expose the bearing on the machine. In practice the fix is quick once the fault is confirmed: the old rear bearing comes out, the replacement goes in, and a full test cycle proves the machine is back to normal. Below, the cost breakdown shows what the component and the bench time each contribute to the total. Weighed beside the $450 to $1,300 of buying new, the repair earns its keep unless the unit is already near the end of the road.

Dryer drum bearing replacement cost

• What it does: the drum bearing supports the back of the drum so it spins smoothly.
• Signs it is failing: a loud grinding or squeal that rises with the drum speed.
• The repair job: replacing the rear bearing or glides and checking the drum seals.
• DIY or pro: usually a technician job — the machine has to come well apart.

Against a new dryer at $450–$1,300 installed, a drum bearing repair at $130–$260 is usually the cheaper fix — unless the dryer is already old or has other faults.

Pro note: a tech replaces the felt seals with the bearing, since a worn seal lets the heat and lint that chewed up the bearing back in.

Is replacing the drum bearing on a dryer worth it?#

For a dryer under roughly 10 years old, putting $130 to $260 into the drum bearing is money well spent — it recovers a working machine for a sliver of the $450 to $1,300 a replacement runs, and nothing else on the machine is near the end of its life. Age shifts the math. When the bearing is the third thing to fail this year, or the unit is well past 10 years, a top-of-range $260 bill is better put toward a replacement than a patch. A useful test: if the rear bearing is the only fault on an otherwise solid unit, fix it; if the machine is old and the repairs are piling up, price out a replacement first. Booking a pro means the rear bearing is diagnosed right the first time and the repair carries a written guarantee, which matters most on a part buried this deep.

Dryer Drum bearing replacement cost: FAQ#

How much does a dryer drum bearing replacement cost?#

A dryer rear bearing replacement generally runs $130–$260, and about $195 on a routine job. Part grade, brand, and how hard the drum bearing is to reach are what set where you land.

Is replacing the rear bearing worth it, or should I just buy new?#

Usually worth it on a machine that is not too old — $130 to $260 is minor next to the $450 to $1,300 of buying new. Replacement only wins once the machine is aging and other repairs are stacking up behind this one.

What makes the bearing fail?#

Common causes are friction and load over thousands of cycles that wears the surface flat or brittle. The warning signs to watch for are a loud grinding or squeal that rises with the drum speed.

Can I replace the rear bearing myself?#

Most owners leave this one to a pro: reaching the rear bearing and confirming the diagnosis takes the right tools, and a wrong part is money down the drain. A technician also carries the exact component and stands behind the work.

How long does the job take?#

Plan on about two to three hours for the swap itself, plus a test cycle afterward to confirm the fault is cleared. A tech who has done it before tends to work at the fast end of that estimate.