How much does a dishwasher tub gasket replacement cost?#
Replacing the tub gasket on the unit runs $100–$200 ($150 is the usual figure). The tub gasket is what handles running a full wash-and-dry cycle. When it fails, dishes coming out gritty or still wet is usually the first clue, and on a dishwasher that is not a fault you can safely ignore for long. Where a given quote lands depends on whether the part is factory-original or aftermarket and how hard the unit is to open. You are paying for a careful install more than for the part — a gasket that is not seated right just fails again. Against $400–$1,200 for a new dishwasher, that keeps a repair the cheaper move on a unit that is otherwise sound.
Dishwasher tub gasket replacement cost
- What it does: the tub gasket seals the door against the tub so the wash water stays in.
- Signs it is failing: water dripping from the door, a puddle at the base, or a musty smell.
- The repair job: fitting a new gasket into the door channel and testing a full cycle.
- DIY or pro: an owner-friendly repair — the gasket presses into a channel.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $100 |
| Typical repair | $150 |
| Premium part or hard access | $200 |
| A new dishwasher, installed | $400–$1,200 |
Against a new dishwasher at $400–$1,200 installed, a tub gasket repair at $100–$200 is usually the cheaper fix — unless the dishwasher is already old or has other faults.
Pro note: a tech warms the new gasket to relax it and re-squares the door, or the fresh seal weeps at the corners.
Is replacing the tub gasket on a dishwasher worth it?#
Replacing the tub gasket pays off whenever the dishwasher is otherwise sound: $100–$200 beats the $400 to $1,200 of buying new, and it spares you delivery and haul-away on top. With a sink of dishes piling up, most owners would rather fix a Bosch- or Miele-tier unit than replace it; if instead it is past roughly 10 years and carrying other faults, put the money toward a replacement — a single fix rarely rescues a tired machine.
Do You Have the Right Tools?
Water pressure gauge ($60), spray arm tester, float switch multimeter ($85), and drain inspection camera. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Dishwasher Tub gasket replacement cost: FAQ#
How much does a dishwasher tub gasket replacement cost?#
Most jobs run $100 to $200, with $150 the common figure once parts and labor are counted.
Is replacing the tub gasket on a dishwasher worth it?#
Yes on a sound or higher-end dishwasher: $100–$200 stays well below $400–$1,200. Once the machine is near the end of its life, buying new is the better spend.
What makes the tub gasket fail on a dishwasher?#
The tub gasket usually gives out from the rubber hardening, tearing, or warping until it no longer holds a tight seal.
Can I replace a dishwasher tub gasket myself?#
No — it means opening the sealed refrigerant system, which by law needs certified recovery equipment, so it is strictly a professional repair.
How long does a dishwasher tub gasket replacement take?#
Expect a half-day. Recovering the old refrigerant, fitting the new part, evacuating the system, and recharging it all take time and cannot be rushed.
Senior Appliance Repair Technician · 15 years experience
EPA-certified technician with 15 years of experience specializing in refrigerator and cooling system repairs.
