F2 on a Bosch cooktop
Bosch documents F2 as an overheating of the electronics, after which the corresponding cooking zone has been switched off. Your meal does not have to be lost: move the pan to another zone and carry on at a moderate setting while the affected zone cools. If F2 keeps coming back during ordinary cooking, the cooktop's ability to cool itself needs looking at.
Error codes
Reference| Code | Meaning |
|---|---|
| F2 | The electronics have overheated. The corresponding cooking zone has been switched off. |
How F2 interrupts cooking
- A zone stops partway through a recipe — The pan stops sizzling or boiling and the zone display shows F2.
- The code follows frying or searing at full power — High settings held for a long time heat the electronics most.
- The other zones still respond — Only the overheated zone has been switched off.
- After a rest, the zone works again — The electronics have cooled back within their limit.
What leads to F2, in likelihood order
- A long, hot session on one zone — The leading cause: deep frying, stir-frying or searing at the top setting for a long stretch.
- An empty or nearly dry pan — Second: a pan with nothing in it gets very hot and passes that heat into the glass and the parts below.
- Several zones at high power at once — Third: running the whole cooktop hard raises the temperature inside the unit.
- Restricted airflow or a weak fan — Fourth: if the cooling path is blocked, even normal cooking can trigger F2.
Sorting out an F2
- Move the pan and keep cooking — Use another zone at a moderate setting to rescue the meal.
- Think about the settings used — Long periods at the top setting explain a single F2.
- Check the pan — A dry, warped or very heavy pan adds heat to the glass.
- Watch for a repeat at normal settings — Repeats during moderate cooking point to the cooling system.
Getting through the meal and afterwards
- Shift the pan to another zone — Pick a zone of similar size and set it to medium.
Tools: oven glovesAbout 1 min
- Leave the tripped zone to cool — Do not try to restart it straight away.
About 20 min
- Lower the setting next time — Bring food up to heat on high, then turn the zone down.
Tools: ::
- Check the space under the cooktop — With the power off, make sure nothing blocks the air openings beneath.
Tools: flashlightAbout 10 min
- Stop at the housing — Cleaning the fan or checking the electronics is done by a professional with the cooktop removed.
Tools: ::
Hot pans and live parts
Use gloves when moving a hot pan from an overheated zone, and set it on a heat-resistant surface rather than the edge of the cooktop. The glass stays hot after F2, so keep hands and children clear. Switch off the cooktop's breaker before checking underneath, and leave the casing shut: the electronics can keep a charge after the power is cut. Never cook on a cracked glass top.
When to get F2 checked
Get the cooktop checked if F2 appears during ordinary cooking at medium settings, if it affects several zones, or if the fan underneath is silent or rattling. Those patterns mean the cooling or the electronics are at fault, and both are reached with the cooktop taken out of the counter.
Which cooktops this covers
This reading of F2 applies to Bosch induction cooktops where the brand lists it. Other Bosch cooking appliances, gas cooktops and other brands, which may use F2 for something else entirely, are outside it. There is no model-specific F2 page yet; consult the documentation for your model for its zone layout and cooling arrangement.

